Organic Sample Preparation
12Pages

ORGANIC SAMPLE PREPARATION

WSPE MANUAL VACUUM MANIFOLD SPE Process control of the flow rate is critical to guarantee reproducible extractions. Differently than any other systems, the LabTech WSPE vacuum manifold features a patented valve system able to grant precise flow control through each cartridge. The WSPE vacuum manifolds allow to process up to 12 (WSPE12) or 24 (WSPE24) samples simultaneously. TECHNICAL FEATURES • Glass base resistant to solvents preventing condensation and discolor • Anticorrosion cover to avoid deformation under high-pressure working conditions • High quality and reliable PTFE rack •...

The Extrapid manual SPE system is the ideal partner when treatment of large volume samples is required. A unique and flexible extraction solution for standard and routine SPE needs in environmental analysis. TECHNICAL FEATURES • 3-ways valves to efficiently control the sample collection and the waste discharge • During operation process: - No need to switch ON/OFF the vacuum pump - No need to wait for venting and removing collection vials - No need to drain the waste liquid and clean the vacuum chamber • Up to 4 samples run individually or simultaneously • 1, 3, 6mL cartridge and 47, 90mm...

SEPATHS UP THE INNOVATIVE SPE SOLUTION The Sepaths UP is designed for both cartridge and disk applications to treat samples with different volumes. It can be applied to extract trace organic compounds from drinking water, surface water, ground water, food, beverage and other samples. Sepaths UP automatically treats from 1 to 12 same or different samples, through the whole treatment process, including condition, sample loading, rinsing, elution and concentration. It is a closed system able to completely remove solvent vapors trough the exhaust line (included). TECHNICAL FEATURES • From 1 to...

Complete software solution • Possibility to run simultaneously different methods • Real-time process monitoring • Possibility to modify and create customized methods Optional Concentration Module (E.T. Concentrator) • Dedicated concentration for each channel • Fast concentration by nitrogen flow • Parallel concentration model • Modular configuration for different number of sample channels

SEPLINE-S AUTOMATION AND PRODUCTIVITY CONCEPT The SepLine-S automated solid phase extractor is the result of the latest liquid-solid extraction techniques and mass chromatography highest requirements in terms of sensitivity and reproducibility. Largely used in environmental protection, food, petrochemical, pharmaceutical, clinical, life sciences and other applications thanks to its flexibility. The SepLine-S series includes three models: Single, Dual and Four-channels. Condition, sample loading, rinsing and elution steps are processed automatically by software according to user needs. A...

SepLine-S2 Dual channels AutoSPE system to perform simultaneously two samples. Management system allows running different methods for each channel. SepLine-Sl Single channel AutoSPE system to perform single sample batch processing. It can automatically achieve conditioning, sample loading, rinsing and eluting steps. Thanks to the included nitrogen purge module, SepLine-S is the ideal partner for routine and R&D needs in the organic sample preparation. The new quantitative concentrator can be connected to the main unit by a plug-and-play procedure. SepLine-S4 Four channels AutoSPE system to...

CARTRIDGE HOLDER MODULE • • • • • SPE cartridges are moved by sliders to the set position via software Optimized design to allow cartridge exchange 60 sample extractions automatically handled via PC software Compatible with the majority of SPE cartridge specifications Fully closed treatment process to avoid solvent vapors to ambient Positive pressure extraction mode to ensure stability of the recovery rate Low-pressure sealing technology Air bubble technique to prevent solvent/sample cross-contamination Closed system to ensure environmental protection. No additional consumables required...

TECHNICAL FEATURES • Possibility to run up to 6 samples • Parallel concentration model • Possibility to simultaneously or separately work with six channels • Nitrogen blow in combination with heating concentration mode • Dry block heating mode to avoid potential water vapor interference • PID temperature control with digital display • Possibility to choose the best position of nitrogen needle to ensure the most efficient evaporation • Dedicated nitrogen flow regulator control for each sample channel • Compatibility with collection vials of Sepaths UP • Unique “open view” to control the...

The new LabTech MuLtiVap8 automatic parallel system increases the capacity and sample throughput in laboratories and maintains quality and low cost. With this system it is possible to evaporate to solid state or concentrate into a fixed end-point volume. A compact solution compared to conventional rotary evaporators, with the possibility to be used outside the fume hood thanks to the integrated vapor exhausting system. TECHNICAL FEATURES • Vortex nitrogen purge to get the highest concentration efficiency. The location and direction of nitrogen purge can be adjusted according to the...

The MV5 is the latest multi-channel and multifunctional parallel instrument designed by LabTech, including all accessories and functions to ensure the highest standard of efficiency, speed, reliability, throughput and safety of any concentration process. Nitrogen sweeping, needle level adjustment and visible concentration process are only few of the advantages offered by MV5. TECHNICAL FEATURES • 54 sample positions able to work either individually or simultaneously • Automatic adjustment of nitrogen needle according to the sample volume reduction • Visible concentration process thanks to...

LabTech, your reliable laboratory solution provider. LabTech is a leading manufacturing company with skill and passion devoted to provide advanced laboratory solutions to the analytical community. We are located in Sorisole, northern Italy, with facilities in USA and China. Incorporated with global branches, LabTech is organized into R&D, production, marketing & sales and customer support. Major LabTech products include organic/inorganic sample preparation systems, laboratory cooling/heating/ temperature control equipments, analytical instruments and gas generators. With knowledgeable...