DFD-DH Series
8Pages

DFD - DH Series Desiccant Flexible Dryer & Drying Hopper Systems

Desiccant Flexible Dryer Introduction Drying of plastics raw materials is crucial in the manufacturing of a high quality product. Labotek´s drying equipment is based on the aim of ensuring the highest possible levels of reliability, consistency, simplicity and flexibility. Labotek is manufacturing a wide range of dry air drying systems, depending of the product being dried. Our comprehensive range of desiccant drying units is starting from 100m3/h and extends up to 8500 m3/h. Drying hoppers are sized from 15 litres up to 10000 litres. Labotek is offering premium solutions in drying, either...

Desiccant Flexible Dryer 300-450 Series The all new developed DFD300-450 series of desiccant dryers is aimed at the medium sized drying requirements and can dry several hygroscopic plastics raw materials simultaneously. DFD 300-450 has build-in frequency inverter as standard. The dryer has an extremely small footprint, compared to the air volume achievable. Operating principles are identical to the smaller series, however the DFD 300-450 range is capable of supplying dew point down to -40°C or better. Technical Data DFD 100-450 Technical specifications 100 150 200 300 450 Supply of...

DFD 600-1700 The DFD 600-1700 range caters for larger drying requirements. There are 4 sizes in this DFD range: 600, 1000, 1500 & 1700m3/h. The desiccant dryer is combined with one or several drying hoppers (DH), depending on application. This series of dryer is an integral part of Labotek´s centralized drying systems. In order to ensure the most stable high quality drying of plastics raw materials, the DFD comprises two separate systems as standard Two desiccant beds containing molecular sieves are engaged alternately in a closed drying system. One of the beds will always be operative in...

The 4000-8500 series of desiccant dryers is targeting the very large drying requirements. The dryer is equipped with multiple desiccant beds (4-6) in order to achieve up to 8500m3/h of dry The series are among the most energy saving large dryers available, owing to the use of high volume air ventilation blower with very low power comsumption. DFD operates at noise levels Inside view DFD4000-8500 showing multiple desiccant Technical Data DFD 600-8500 bed assemb|y Ventilation kit for tropical performance, control Ventilation kit for tropical performance, complete* Slide valve monitoring*...

Drying Hopper Introduction The Labotek series of Drying Hopper (DH) are easily connected to the Labotek DFD series via a fixed airtight interconnecting ducting system. A complete standard range of drying hoppers is available from 15-10000 litres, all with interior finish in stainless steel AISI 304. Each drying hopper has individual temperature controller, 140 where desired drying temperature is consistently monitored via solid state relays. All Labotek drying hoppers comes with airtight dry air ducting system, separate over temperature thermostat and standard floor stand. Alternatively the...

Labotek A/S Strøbjergvej 29 DK-3600 Frederikssund +45 4821 8411 info@labotek.dk www.labotek.com Representative