DDL - Desiccant Dry Loader Mobile

Product catalog summary

Overview: The Desiccant Dry Loader Mobile (DDL-Mobile) by Labotek A/S is designed for energy-efficient drying of materials. It features a moisture-dependent regeneration system that significantly reduces energy consumption and includes an overdrying protection system known as LESS.

Key Features:

Energy savings through a moisture-dependent regeneration system.
Overdrying protection system (LESS).
Graphic user interface with a color touch screen.
Available in four sizes: 25, 40, 75, and 100 liters.
All contact points with raw materials are made of stainless steel.
Drying temperature range from 60°C to 140°C, with a high-temperature version available up to 180°C.
Filter-protected system to prevent cross-contamination of the desiccant bed.
Built-in vacuum conveying control and system.
Low noise level operation.
3-year warranty.

Specifications:

Air Volume: 25 m3/h for DDL-I 25/25 and DDL-I 25/40; 40 m3/h for DDL-I 40/75 and DDL-I 40/100.
Drying Hopper Sizes: 25, 40, 75, and 100 liters.
Dewpoint Temperature: Better than -35°C.
Drying Time: 60-180 minutes.
Regeneration Time: 20-38 minutes depending on the model.
Power Supply: 3N ~ 400V 50/60Hz.
Power Consumption: Maximum 2.6kW for smaller models and 3.4kW for larger models.
Blower Capacity: 0.4kW for all models.

Dimensions:

Model DDL 25/25: A - 1057mm, B - 988mm, C - 840mm.
Model DDL 25/40: A - 1252mm, B - 988mm, C - 840mm.
Model DDL 40/75: A - 1368mm, B - 1117mm, C - 853mm.
Model DDL 40/100: A - 1583mm, B - 1117mm, C - 853mm.

Optional Features:

Magnet grid in Catchbox.
Built-in dewpoint sensor.
Alarm lamp.

Catalog excerpts

DDL-Mobile Dessicant Dry Loader Mobile Optimised for energy saving

Open the catalog to page 1

Desiccant Dry Loader DDL -Mobile Standard Features • • • • • • • • • • • Significant energy savings via moisture dependant regeneration system. Overdrying protection system (LESS). Graphic user interface via colour touch screen. Available in 4 sizes; 25, 40, 75, and 100 litre. All raw material contact points, made of stainless steel. Range of drying 60°C-140°C (60ºC - 180ºC in HT version). Filter protected system preventing cross contermination of desiccant bed. Build in vacuum conveying control. Low noise level. Build in vacuum conveying system. 3-Year warranty. Options: • Magnet grid in Catchbox...

Open the catalog to page 2

All Labotek catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list