Labo Gas Regulator
Labo Gas Regulator
- Outer Dimensions: 191 x 88 x 208 mm (width x depth x height)
- Weight: 2.2 kg
- Gas Inlet Pressure: Maximum 3.0 bar
- Gas Outlet Pressure: 0 – 2.5 bar
- Compatible Gases: CO2, N2
- Wall Mounting: Possible with an opening at the back
- Ensures fluctuation-free operation of the Labo Gas Mixer, especially when the same gas source is used for CO2 incubators.
- Adaptable for gas supply via gas bottle with a pressure reducer or facility-installed gas supply.
- Suitable for environments requiring different gas pressures from a single supply source.
- Allows for two different adjustable gas outlet pressures from one gas supply.
- Quality Assurance: Made in Germany
The document includes an application example of the Labo Gas Regulator used with a Labo Gas Mixer, three Labo C-Top units, and three C60 incubators.
Revision 2, dated January 2017.
Catalog excerpts
Labo Gas Regulator Quality - Made in Germany Technical data: • Outer dimensions: 191 x 88 x 208 mm (w x d x h) • Weight: 2.2 kg • Gas inlet pressure: max. 3.0 bar • Gas outlet pressure: 0 - 2.5 bar • Use with CO2, N2 • Wall mounting possible (opening at the back) 15971 • Necessary for the fluctuation-free operation of the Labo Gas Mixer (continuous gas consumption) if the same gas source is used to provide gas for CO2 incubators (pulsed gas consumption) • Adapted for gas supply by gas bottle with gas pressure reducer or facility installed gas supply • Suitable for operation in various environments where different gas pressures need to be generated from one supply source Email: [email protected] Address: Labotect Labor-Technik-Gottingen GmbH Kampweg 12 37124 Rosdorf Germany Postal address: Labotect Labor-Technik-Gottingen GmbH Postfach 200212 37087 Gottingen Germany Court of register: Gottingen: HRB 1394 WEEE-Reg-No: DE 86039820 Managing director: Delia Schinkel-Fleitmann Dr. Friederike Fleitmann
Open the catalog to page 1
Email: [email protected] Address: Labotect Labor-Technik-Gottingen GmbH Kampweg 12 37124 Rosdorf Germany Postal address: Labotect Labor-Technik-Gottingen GmbH Postfach 200212 37087 Gottingen Germany Court of register: Gottingen: HRB 1394 WEEE-Reg-No: DE 86039820 Managing director: Delia Schinkel-Fleitmann Dr. Friederike Fleitmann
Open the catalog to page 2All Labotect catalogs and technical brochures
Aluminum Heating Blocks2 Pages
Blockthermostat1 Page
Retractor Frame1 Page
Hot Plate A31 Page
Hot Plate 1001 Page
Hot Plate 0621 Page
Cell-Trans 40161 Page
InControl 10502 Pages
SAFE Sens® pH monitoring2 Pages
Incubator-Filter-Box1 Page
Gas In-Line-Filter1 Page
LaboDat+2 Pages
Labotect General Catalogue116 Pages
Gasmonitor2 Pages
Labo Gas Mixer2 Pages
Labo C-Top3 Pages
CO2 Incubator Labo C2015 Pages
CO2 Incubator C2005 Pages
CO2 Incubator C604 Pages
CO2 Incubator C162 Pages
- Pump
- Seawater pump
- Suction pump
- Gas analyzer
- Filter with cartridge
- Materials handling pump
- Portable analyzer
- Continuous analyzer
- Laboratory incubator
- Temperature analyzer
- Gas separator filter
- In-line filter
- Medical pump
- Particulate pre-filter
- Natural convection incubator
- Activated carbon filter
- PH meter
- Hard cleaning job detergent
- Cleaning detergent