Incubator-Filter-Box
Incubator-Filter-Box
- The Incubator-Filter-Box comes with a preinstalled composite filter, which is the standard filter and should be replaced every 3 months.
- It operates under regular incubator atmosphere conditions.
- Dimensions are 10 cm in diameter and 12 cm in height, with a weight of approximately 600 g when using the composite filter.
- The device switches on automatically for 5 to 6 minutes and restarts after a 40-minute break.
- Designed for use with all cell culture incubators with a minimum volume of 60 liters.
- Efficiently eliminates particles, volatile organic compounds (VOCs), and other impurities quickly.
- Includes an external controller located outside the incubator.
- Does not negatively affect the atmosphere inside the incubator.
- Offers flexible usage options.
- Gas filter A1
- Composite filter A2-P3D
- Quality assurance: Made in Germany.
- Separate unit specifically for filtering the atmosphere in incubators.
- Reference numbers for optional filters: 14526REF, 14548REF, 15415REF.
- Document revision: Rev. 7_04/2017.
Catalog excerpts
Incubator-Filter-BoxQuality - Made in Germany Seperate unit for filtering the atmosphere in incubators Features: • Suitable for all cell culture incubators with minimum 60 l volume • Eliminates particles, VOCs and other impurities in a very short time • External controller outside the incubator • No negative influence on the atmosphere inside the incubator • Composite filter is preinstalled = standard filter (to be replaced every 3 months) • Operation under regular incubator atmosphere • Dimensions: diameter 10 cm / height 12 cm • Weight: approx. 600 g (when using composite filter) Optional filters: Gas filter A1 Composite filter A2-P3D • Switches on automatically for 5 - 6 minutes; starts again after a break of 40 minutes Address: Labotect Labor-Technik-Gottingen GmbH Kampweg 12 37124 Rosdorf Germany Court of register: Gottingen: HRB 1394 WEEE-Reg-No: DE 86039820 Managing director: Delia Schinkel-Fleitmann Dr. Friederike Fleitmann Postal address: Labotect Labor-Technik-Gottingen GmbH Postfach 200212 37087 Gottingen Germany
Open the catalog to page 1All Labotect catalogs and technical brochures
Aluminum Heating Blocks2 Pages
Blockthermostat1 Page
Retractor Frame1 Page
Hot Plate A31 Page
Hot Plate 1001 Page
Hot Plate 0621 Page
Cell-Trans 40161 Page
InControl 10502 Pages
SAFE Sens® pH monitoring2 Pages
Gas In-Line-Filter1 Page
LaboDat+2 Pages
Labotect General Catalogue116 Pages
Labo Gas Regulator2 Pages
Gasmonitor2 Pages
Labo Gas Mixer2 Pages
Labo C-Top3 Pages
CO2 Incubator Labo C2015 Pages
CO2 Incubator C2005 Pages
CO2 Incubator C604 Pages
CO2 Incubator C162 Pages
- Pump
- Seawater pump
- Suction pump
- Gas analyzer
- Filter with cartridge
- Materials handling pump
- Portable analyzer
- Continuous analyzer
- Laboratory incubator
- Temperature analyzer
- In-line filter
- Medical pump
- Particulate pre-filter
- Natural convection incubator
- Activated carbon filter
- PH meter
- Hard cleaning job detergent
- Cleaning detergent