Cell-Trans 4016 Quality - Made in Germany Features: Secure transport of cells without electric mains and CO2 connection Factory-aligned parameters: 37 °C and 5 % CO2 Different temperature or CO2 concentration possible (to be advised before order) Operation at 12 V car voltage possible Use of different heating blocks Easy handling and cleaning Compact Design Transport incubator for a secure, mobile and stationary preservation of specimen, culture media etc. Technical data: Power supply: • Input: 100 - 240 V AC, 50/60 Hz • Output: 12 V DC power supply or with car voltage via adapter cable Dimensions: • Outside: 320 x 190 x 280 (l x w x h in mm) • Inside: 210 x 140 x 170 (l x w x h in mm) Temperature: • Available between 32 °C and 39 °C (to be advised before order) • Accuracy of regulation ±0.3 °C (measured with heating block REF 10264); ± 0.5 °C (with smaller heating blocks used with position frame) Heating up time: • approx. 2 h CO2 concentration: • 5 % (different concentrations possible) • Heating block inside necessary • Connection to CO2 supply with pre-pressure of 0.8 bar necessary • CO2 accuracy ± 0.3 % CO2 (when supplied with CO2 with pre-pressure of 0.8 bar ± 0.05 bar during supply) Parameters during transport without connection to electric mains and CO2 bottle: 13867 (without heating block) Email: [email protected] Address: Labotect Labor-Technik-Gottingen GmbH Kampweg 12 37124 Rosdorf Germany Postal address: Labotect Labor-Technik-Gottingen GmbH Postfach 200212 37087 Gottingen Germany Court of register: Gottingen: HRB 1394 WEEE-Reg-No: DE 86039820 Managing director: Delia Schinkel-Fleitmann Dr. Friederike