Catalogs >
Labortech s.r.o. >
Servo-Hydraulic Horizontal Static Testing Machines LabTest 6.1500H.7 with Extended Clamping Length 10m

Servo-Hydraulic Horizontal Static Testing Machines LabTest 6.1500H.7 with Extended Clamping Length 10m
2Pages

Catalog excerpts

Servo-Hydraulic Horizontal Static Testing Machines LabTest 6.1500H.7 with Extended Clamping Length 10m - 1

Production of materials testing equipment and automation Product Information Servo-Hydraulic Horizontal Static Testing Machines LabTest 6.1500H.7 with Extended Clamping Length 10m iii; 8H-9BS ““HIS!" iiU: Machine use Servo-hydraulic testing machines of the series H.7 with extended length up to 25 m with adjustable (electromechanical or manual) testing area are designed for safe and effective testing of materials and whole products in tension. This series of machines is characterized by high stiffness of the frame and mechanical resistance. Wide range of hydraulic units allow static loading of specimens (textile straps, ropes, chains, etc.) in forces up to 1500kN. Properties of the Machine ■ Horizontal frame of weld modular design concept with high stiffness and good ergonomic design. ■ High level of safety according to EN 954-1 Category 3 ■ The unit meets all necessary safety requirements such as DIN 51333, EN ISO 13489, and other European standards ■ Detection and visualization of operational errors in the program ■ Centrally located controls ensuring simple handling, assembly and testing ■ Extremely accurate metering of sensor ■ Data output capabilities via LAN or USB interface ■ Quiet hydraulic drive with low noise level <70 db and low energy consumption, automatic checking of parameters of HU and air cooling. ■ Automatically controlled loading of power and position loop through a proportional servo valve. ■ A modular configuration of the machine with the addition of any accessories from company LABORTECH, including special tools and clamps, strain gauges, etc. ■ Measuring electronics due to the high data acquisition rate 1 kHz and a high resolution 24-bit AD converters allows very accurate testing in the large measuring range of the sensor without any retrofitting of the machine with other sensor. ■ Ability to control the machine by remote control RMC 7 with one-touch without using a PC. ■ Supports for standards EN, ISO, ASTM, GOST, CSN, DIN The base machine includes: A frame including protective safety cover with electrical monitoring A hydraulic unit for a long-term tests with acoustic enclosure and cooling A hydraulic connection between the HA and the frame 19 " touchscreen LCD monitor Industrial Rittal rack 2000x600x600 mm Air circulation unit Industrial PC with operating system Windows Measuring and control electronics EDC 220 Preparations for the locking mechanism HBM Load cell, accuracy class according to EN 7500-1 SSI Linear encoder with a resolution of 1 um Remote controller 7 RMC with LCD display and STOP button Software integrated in the remote control Special fixtures for chains and straps testing A bath to capture insulators after destruction Remote Access Service LABWebservis Documentation in requested language

Open the catalog to page 1

Servo-Hydraulic Horizontal Static Testing Machines LabTest 6.1500H.7 with Extended Clamping Length 10m - 2

... from development to implementation Production of materials testing equipment and automation Technical data ''Machine height including vibration dampers Technical changes are reserved by manufacturer 2The distance between the piston and reverse X-head with stretched piston 3Weight without Hydraulic Unit, force transducers and all accessories 4Open HU used with water cooling, and measured in a static mode, measured 1 m from the HU. Manufacturer: LABORTECH s.r.o., Rolnicka 130a, 747 05 Opava, Czech republic. Tel.: +420 553 731 956, +420 553 775 327 Mob.: +420 602 527 646, +420 731 656...

Open the catalog to page 2