laterials testing equipment and automation Product information Pendulum Impact Tester LabTest ® CHK 50J-I LaHr[Q umwM ohmi.i ■M ii« Provo; Description and use of equipment Charpy pendulums type LabTest CHK 50J-I are used to control production quality, input and output checks of materials and products in testing rooms and laboratories. On CHK impact pendulums, Charpy, Izod, Dynstat, Brugger and tensile strength tests can be performed according to EN, ASTM, ISO DIN standards. Instrumented Charpy pendulums are used to determine work, energy, strength and deformation according to EN ISO 14556. Energy consumption occurs when the specimen rod is broken. For an instrumentalized Charpy pendulum, the work is calculated from the magnitude of the impact force, depending on the deflection of the test body, where the area under the flexural force curve determines the work used at the fracture of the test body. The instrumented Charpy pendulum allows to evaluate: force values such as Fgy (maximum macroplastic deformation), Fm (maximum force), Fiu (force at the moment of crac k initiation), Fa (crack stop force), deflection values Sgy, Sm, Siu, Sa the values of the impact work: Wm, Wiu, Wa, Wt. Basic machine set ■ Very rigid foundation with 4 leveling holes ■ Automatic arm lift with electronic brake ■ Documentation for the construction of a concrete base ■ Protective safety cover made of profile sections and polycarbonate ■ Digital control unit with integrated touchscreen LCD monitor and PC with high speed card - 12 MHz ■ Intuitive ImpactTest - I software ■ Higher resolution incremental sensor for accurate angle measurement ■ A tunnel for automatic specimen extraction ■ Very solid construction of the machine ■ High safety according to EN 954-1, Category 3 ■ Running safety control during hammer impact ■ Detection of operating errors and theirs display in the program ■ Allows hammer to start by pushing the button and immediately after closing the door in 0,5 second, which allows for breaking a specimen in 5 seconds after removing it from a cooling bath ■ Centrally located control components provide easy operation and testing ■ Easy exchange of anvils and supports for specimens ■ Digital operating control with touch screen LCD monitor ■ Automatic arm brake ■ Automatic arm lift in 5 seconds ■ High speed testing ■ Fast and precise sample centering ■ Protective cover for completely safe operation ■ High machine frame rigidity and shock resistance ■ Extremely accurate rotary sensor ■ Option of the data output via USB or Ethernet interface ■ Ergonomic design ■ Device meets all the necessary safety requirements like DIN 51 333, EN ISO 13489 and other European standards

laterials testing equipment and automation Software IMPACTTest-I description O ur new ImpactTest - I test test software was developed in a modular way to meet all set criteria for instrumental impact tests. This software module, coupled with a high-speed card, is capable of handling input data at up to 12MHz. Our ImpactTest - Contains the parameters that are required to determine the quantities required by an instrumental test by Fa, Fgy, Fm, Fbf, g, ho, KV, m, s, sm, sbf, st, Wm, Wt Impact and Impact Strength, which supports the CSN, DIN, EN, ISO, ASTM, GOST standards and other industry standard test...