Production of materials testing equipmentand automation Product Information Electrodynamic Testing Machines LabTest 6.0125.2 - 6.25.2 Machine use LABORTECH Company offers universal electrodynamic testing machines of the series 6.xxx.2 that allow testing in high speed loading. These test systems are used for fatigue tests of materials and components, as well as for testing of final products. These devices can also perform cyclic tests with a large stroke as well as fatigue and reliability testing up to 25kN load and 100Hz. The base machine includes: ■ Machine frame including EDC 220 (EDC 580) ■ Machine stand designed for bench top ■ Protective safety cover ■ Sensor of series "U10M" for tensile/pressure for full load ■ Remote control RMC 6 with LCD ■ Software integrated in the remote control ■ Service remote control via LABWebservis Supplements and Accessories: ■ Wide range of grips, compression and bending tools ■ Extensometers (mechanical, contactless) ■ Special temperature chambers and furnaces Machine description and main advantages ■ The test machine is equipped with two hard-chromed guiding rods with hardness 62 HRC, where you can set the upper X-head travel to any test position. ■ The machine is equipped with anti vibration leveling feet, which perfectly absorb vibrations from the machine to the table or the floor. ■ Robustness of the frame ensures high rigidity, durability and resistance against vibration and mechanical damage. ■ A load cell designed for cyclic strain-compensated bending moment and a lock against rotation. ■ Cooling of the machine is controlled by an electronic air circulation resulting in a long service life of the machine. ■ Due to high data acquisition rate 1 kHz or 5kHz and high resolution of AD converters 24 bit, the measuring electronics allows very accurate testing in a large measuring range of the load cell without need of retrofitting the machine with another sensor. ■ High operator comfort and customization tools for specific customer requirements as special protective covers, different speeds, different types of special grips, adjustments of X-head travel for custom tools etc. ■ Simple operation of the machine by remote control with readings, directly from the LCD remote control. ■ Centrally located control units which provide easy control of hydraulic grips and the machine. ■ Ideal ergonomic design of the machine allows simple fatigue testing.

... from development to implementation Production of materials testing equipment and automation Technical data 1Machine height including vibration dampers Technical changes are reserved by the manufacturer 2The distance between the piston and the top flange beam with retracted piston 3Weight without a hydraulic unit, force transducers and all accessories 4Measured 1 m from the actuator without loading Software Test & Motion - DYNPACK ® ■ Simple, intuitive and efficient ■ Quick and efficient testing ■ Definable all kinds of protocols printing ■ Individual files programming ■ A set of programs...