Production of materials testing equipment and automation Product information Drop Weight Testers for Impact Tests - DPFest up to 1000J Machine use Drop weight tester machines produced by LABORTECH Company are designed for testing falling weight. Weights can be tested in free fall, or accelerated by linear springs and they are automatically adjusted to a defined position. We offer standard drop weight testers for various applications that can be adapted to a variety of impact energy and impact speed up to 1000J. Machine description and main advantages ■ Robust vertical test frame with high stiffness, durability, good ergonomic design and maintenance-free operation. ■ The device meets all necessary safety requirements such as DIN 51333, EN ISO 13489 and other European standards. ■ Special feet and suspension absorbing impact energy ■ Automatic and fast approaching X-head travel with weights to the defined position with accuracy of 0.01 mm. ■ Modular configuration of the machine with the ability to add any accessories of LABORTECH company, including temperature chambers, special tools, punch plugs, clamps, external sensors... ■ Possibility of performing tests at reduced and increased temperatures ■ Measuring electronics with a highspeed card up to 12MHz ■ 16 Bit electronics in combination with a load cell and a track sensor allows performing a very precise testing at speeds up to 20m/s. ■ High level of testing comfort due to operating panel with a touchscreen LCD and software DropTest. ■ Support for standards DIN, EN, ISO, ASTM, GOST. Machine base includes: ■ A machine frame incl. sensors and engine displacement of weights ■ A set of calibrated weights according the type of drop weight tester ■ Protective safety cover ■ Measuring and control electronics in bench top or floor top design ■ Basic software DropTest Supplements and accessories: ■ Fixtures (blades, abutments, punches) according to EN ISO 148-1, ISO 179, ISO 9854, ISO 14556, ISO 3351: 1975 49 0117, EN ISO 6603, ASTM D3763, ASTM E23, ASTM D6110 etc. ■ Pneumatic centering device ■ Temperature chambers and furnaces Description of software DropTest Drop Test is a complete software for the drop tester that supports DIN, EN, ISO, ASTM, GOST standards and other industry standard testing methods. The program consists of management tools, a record of the tests performed, a database of test results and subsequent data filtering ability. The program uses MS Windows 7 and higher. The application is designed not only for traditional PCs and LCD monitors but also for industrial systems, which are controlled by touch LCD monitors. DropTest software is designed for serial measurement in impact tests with speeds up to 20m / s.

... from development to implementation Production of materials testing equipment and automation Technical data 1Without accessories Technical changes are reserved by manufacturer 2 Height of the machine including vibration dampers 3Panel height without temperature controller 4Measured at a distance of 1 m from the machine when moving crosshead to the basic position The protective safety shield made from an aluminium construction with profile ITEM and 5 mm safety plexiglass surrounds the testing machine from all four sides, the safety door on the front side is electrically monitored and ensures...