Dual process input meterType series PH1410Features Techn. Data ■ Indication and control of flow, level, differential pressure and others ■ 5-digit 0.56" red sunlight readable display ■ 2 input channels, galvanic isolated ■ Supply 2 x 18 V DC, max. 90 mA per channel ■ Input signal 0 to 20 mA or 0 to 10 VDC ■ Optional plug-in cards: 2 or 4 set points, analog output 0/4...20 mA, 0...10 V ■ Math function on 2 input channels, e.g. as diff. indicator ■ Quick programming mode ■ Add up, min-/max values, 16 step liniearization ■ IP 65 sealed front bezel The dual process input meter PH1410 offers many features and performance capabilities to suit a wide range of industrial applications. The meter has the capability to accept two, 0 to 20 or 0 to 10 VDC signals. In addition, a math function can be performed on the two signals. This unit is rated for NEMA 4X/IP65 outdoor use. The optional plug-in output cards allow the opportunity to configure the meter for current applications, while providing easy upgrades for future need. input (range) Sensor inputs impedance max. contin. display compliance overload resolution Display 5 digit, 0.56" (14.2 mm) variable intensity red sunlight readable Units label kit Each meter has a units indicator with backlighting that can be customized using the units label kit. The backlight is controlled in the programming. Power PH1410-A1: 85 to 250 VAC 50/60Hz, 15VA. PH1410-A2: 11 to 36 VDC, 11 W or 24 VAC +/-10%,15 VA. Transmitter power 18 VDC, +/-20%, unregulated, 70 mA max. per input channel Update rates A/D conversion rate: adjustable 5.3 to 105 readings/sec. Step reponse 60 msec. within 99 % of final readent value up to max. 770 msec. Low frequency noise rejection NMR > 60 dB bei 50/60Hz +/-1 % (can be increased with digital filter). Annunciators A programmable display SP1 setpoint alarm 1 is active SP2 setpoint alarm 2 is active SP3 setpoint alarm 3 is active SP4 setpoint alarm 4 is active Keypad 3 programmable function keys, 5 keys total

Protection IP 65 sealed front bezel El. connection screw-clamp terminals Humidity 0 to 85 % max. RH non-condensing Ambient tmeperature Operating temperature range: 0...+50°C (0 to 45 °C with all three plugin option cards installed) EMC - noise immunity according to EN50082 section 2 - emitted interference according to EN 50081 section 2 for industrial areas, only Weight approx. 295 g (without plug-in options) Scope of delivery panel gasket and mounting clip included Output cards The optional plug-in output cards allow the opportunity to configure the meter for current applications, while providing...