Thermowells
4Pages

Catalog excerpts

ThermowellsType series HP1200 Features ■ Thermowells for resistance thermometer MiniTherm, Type series GA2730 ■ Material stainless steel mat. no. 1.4404 (316L) ■ Instrument connection M12 x 1 ■ DIN 11851, VARIVENT® and Clamp per DIN 32676 / ISO 2852 with EHEDG certificate ■ Various process connections for food/pharmaceutical/biotechnology ■ Static process pressure: - Thermowell: max. 60 bar at a max. temperature of 200 °C - Process connection: according to standard of the respective connection Options ■ For hygienic application: Surface quality - Surface roughness Ra < 0.8 pm - Weld seam < 1.6 pm ■ Material certificate per EN 10204-3.1 ■ Thermowell with reduced tip ■ Elektropolishing of wetted parts ■ Calculation of thermowells upon request ■ Base filled with heat sink compound Application area ■ Pharmaceutical industry ■ Biotechnology ■ Food industry Data sheet T5-051_2019-04_10.00 Page 1/4 LABOM Mess- und Regeltechnik GmbH Im Gewerbepark 13 27798 Hude Germany Hotline: +49 4408 804-444 Fax: +49 4408 804-100 e-mail: sales@labom.com www.labom.co

Open the catalog to page 1

Temperature sensor Temperature sensor: see Type series GA2730, data sheet T4-017 Screwing: Union nut M12 x 1 with spring contact system for best heat transfer Response time: Thermowell 6 x 1 mm without heat sink comp. tg0=15 s with heat sink comp. tgo = 6 s Thermowell with reduced tip without heat sink comp. tgo = 8 s with heat sink comp. tgo = 4 s clamp connection tapered coupling with union nut DIN 11851 Varivent connection NEUMO BioControl connection G1/2B dead-zone free G1A dead-zone free (conical taper of metal) (conical taper of metal) without screwing for sliding screwing see weld-in...

Open the catalog to page 2

Design with field housing Design with circular connector L = Total length thermowell l1 = Insertion length measuring insert Calculation of the insertion length of the measuring insert for: Circular connector: Field housing: Mounting with resistance thermometer MiniTherm GA2730 L = Total length thermowell l1 = Insertion length measuring insert Data sheet T5-051_2019-04_10.00 Thermowells

Open the catalog to page 3

EHEDG certified only in connection with hygienic design (order code option HY) EHEDG certificate valid only if gaskets are used that are listed in the "EHEDG position paper" up to insertion length of 100 mm insertion length > 250 mm upon request Data sheet T5-051 2019-04 10.00 Thermowells

Open the catalog to page 4

Thermowells 4Pages

Catalog excerpts

All LABOM Mess- und Regeltechnik GmbH catalogs and technical brochures

Thermowells
4Pages