Liquid Scintillators for Radio - HPLC Measurement IN-FLOWTM Counting Solutions The Radiochromatography Company n Optimum solutions for every requirement n Highly efficient for 3H and 14C n Economical solutions allow mixing ratios of 1:1 for 14C and 2:1 for 3H n Biodegradable solutions simplify waste disposal n Formulations for high salt and concentrated buffer mobile phases n Low backgrounds, minimal phosphorescence/ chemiluminescence Scintillators for All Requirements From The Radiochromatography Company ... IN-FLOW Counting Solutions meet every criterion – Fluidity and Ease of Mixing, High Counting Efficiences, Low Background, High Carrying Capacity, Biodegradability, Moderate Cost.

IN-FLOWNon-gelling Liquid Scintillation Solutions for Continuous Flow Radioactivity Monitors IN/US Systems, Inc. offers a range of IN-FLOW Liquid Scintillators for use with our b-RAM® and other Flow-Through Detectors. Each solution has been formulated to satisfy particular requirements of different aspects of flow measurement. Formulations are different in response to differences in sample, isotope, and HPLC mobile phase compositions, but in each case, the objectives – high fluidity immediately upon and after mixing, high counting efficiencies, low backgrounds, chemiluminescence and phosphorescence...

Scintillators for All Requirements From The Radiochromatography Company ... IN-FLOW Counting Solutions meet every criterion – Fluidity and Ease of Mixing, High Counting Efficiences, Low Background, High Carrying Capacity, Biodegradability, Moderate Cost. IN-FLOW 2:1 - The Universal Counting Solution If one of our scintillators can be termed "best", it is IN-FLOW 2:1. Though each may be better for some specific application, none offer the universality of IN-FLOW 2:1. IN-FLOW 2:1 meets the first tests for a flow-through scintillator - fluidity and clarity - far better than any other counting mixture....

IN-FLOW TC - High Salt/Buffer Capacity IN-FLOW TC (Tru Count) is a pseudocumene-based scintillator with a substantial content of nonionic and anionic surfactants that has been especially formulated for use with ammonium phosphate and ammonium formate gradient systems. It is generally useful for counting buffers and high salt mobile phases since it resists gelling and phase separation. A special additive controls chemiluminescence. At the suggested 3:1 mixing ratio, IN-FLOW TC solutions notably exhibit higher 3H efficiency when compared to other scintillators tested under the same conditions....