SYSTEM 14 Design | Application| Specifications | Operation

DESIGN APPLICATION

SYSTEM 14 Flexible and ergonomic � Island or wall-fitted system � Easy-to-clean system, fitted without legs � Removable, modular unit systems � Electric height-adjustable worktops � Underbench cabinets/drawers can be moved from side to side without the use of tools � Service bridge with free positioning of gas, water and air ventilation taps and fittings System 14 is a very flexible and modular laboratory furniture system available with a range of different worktop materials, doors, hinges and handles. The system ensures excellent ergonomics with height-adjustable worktops and moveable underbench...

POINT EXHAUST WEIGHING COLUMN

SERVICE CHASE SINK UNIT

Return to furniture and fittings overview Underbench cabinets and drawers SUSPENDED CABINETS Suspended underbench cabinets available with laminate-coated fronts in the following variants: � Door � Drawers x 2 � Drawers x 2+1 � Drawers x 3 � Drawers x 4 Hinge is visible from the outside DRAWER SLIDES Soft-close slides with 100% pull-out. HINGES The self-holding, nickel plated hinge is visible from the outside. Opening angle of 270 degrees. HANDLES Drawer and cabinet door handles are as standard, made from stainless steel with a width of 160 mm from centre to centre. D-handle, acid-proof stainless...

Return to furniture and fittings overview Tables Worktops are available with height-adjust function as an option, with movement of 500 mm (750–1150 mm). Stationary table Height-adjustable table

Return to furniture and fittings overview Worktops MATERIALS y Laminate y Compact laminate y Polypropylene (PP) y Stainless steel, 316 y Epoxy resin y Ceramic WORKTOPS RESISTANCE OVERVIEW Organic solvent Acid /Alka Surface unevenness Laminate Compact laminate Polypropylene (PP) Stainless steel, 316 Epoxy resin Ceramic Excellent COLOURS Laminate STANDARD Postshaped laminate STANDARD Compact laminate STANDARD White with black core FM0085FH Grey with black core FM0074FH Solid white Available only in 12 mm FM0085

Return to furniture and fittings overview Profiles, worktops Profiles, sink unit worktops Bordplader Straight front and rear edge. Straight edges with pre-laminated ABS plastic edge band. All edges have raised edges. Bordplader Post-formed front edge and straight rear edge. Post-formed front edge and grooved rear edge. All edges have raised edges. Post-formed front and rear edge. NB! Theader worktop must be assembled in the centre Bordpl using the special fitting. All edges Bordpl aderhave raised edges. COMPACT LAMINATE Bevelled edges. All edges have raised edges. Sink unit worktops are also...

Return to furniture and fittings overview Sink unit The table below shows the combinations available when choosing the worktop type and sink. SINK UNITS Glued sink STANDARD Worktop material Laminate Inserted sink All-welded sink Stainless steel (304) / Polypropylene (PP) Stainless steel (304) / Polypropylene (PP) Sink, material Compact laminate Stainless steel (304/316) Polypropylene (PP) Epoxy Ceramic SINK SPECIFICATIONS Material Standard dimensions Optional dimensions Bottom Bottom Water valve trap strainer Overflow Standpipe Connection Stainless steel, 304 (all-welded) Stainless steel, 316...

Return to furniture and fittings overview Service chase The Labflex service chase is available either as wall-mounted or for island setups. The hatch at the bottom of the service chase provides access for the laying and servicing of installations. Cable and pipe laying from ceiling to floor Cable and pipe laying from ceiling to unit Cable and pipe laying from ceiling to service bridge Continuous service chase Service chase cut at ceiling edge

Return to furniture and fittings overview Installations LIGHTING LED printed circuit board for installation in the service bridge below the top cabinets. � 4000 K � Brightness: Minimum 1800 lm/m (brightness ~ 1600 lm, equivalent to a 100 W bulb) � Minimum RA90 � Adjustable brightness, 100-10%. Plug-and-Play solution: Only need to connect power. No need for external driver or damper. Wall-mounted service bridge without LED. Wall-mounted service bridge with built-in LED. Standalone island setup and service bridge without LED. Standalone island setup and service bridge with built-in LED. Wall-mounted...

Return to furniture and fittings overview Installations ELECTRICITY Electrical sockets are as standard, positioned flush with the service bridge. Single, SCHUKO Double, SCHUKO Triple, SCHUKO Empty back-box, OBO for fitting in duct

Return to furniture and fittings overview Weighing column The weighing column ensures optimal stability in order that precision measuring work can be executed in the laboratory. The weighing column is designed for precise measurements down to four decimal places, and its measuring is independent of the adjoining structure. The weighing column’s design includes vibration damping, and it can either be freely positioned or set in a worktop with a section cut out for the weighing column/weighing stone. The weighing column’s base plate is made from compact laminate and it is secured to the concrete...

Return to furniture and fittings overview Taps Labflex offers taps in different designs. The following pages will show which types Labflex offers as standard. This design is shown on page 16. This design is shown on page 17.

Return to furniture and fittings overview Taps Certified in accordance with ISO 9001 and Danish Gas Technology Centre (DG) approved. Colour codes on the handle are as standard in accordance with EN 13792. WATER Labflex provides taps with a mixing tap or with separate hot and cold taps. Single cold water tap Separate hot and cold mixer tap Single cold water tap with a wrist-action handle Mixer tap with two wrist-action handles Single tap for distilled water GASES Labflex provides as standard all purity variants and gas types. Taps suspended from service bridge: Worktop-mounted taps in service...

Return to furniture and fittings overview Taps Certified in accordance with ISO 9001 and Danish Gas Technology Centre (DG) approved. Colour codes on the handle are as standard in accordance with EN 13792. WATER Labflex provides taps with a mixing tap or with separate hot and cold taps. Single cold water tap Separate hot and cold mixer tap Mixer tap with two wrist-action handles Single tap for distilled water GASES Labflex provides as standard all purity variants and gas types. Taps suspended from service bridge: Worktop-mounted taps in service spine: Fitted to worktop One eyewash heads Double...