SYSTEM 10
28Pages

{{requestButtons}}

Catalog excerpts

SYSTEM 10 - 1

SYSTEM 10 Design | Application | Specifications | Operation

Open the catalog to page 1
SYSTEM 10 - 2

DESIGN APPLICATION

Open the catalog to page 2
SYSTEM 10 - 3

SYSTEM 10 Robust and flexsible � Detached and robust system suitable for heavy equipment. Easy-to-clean system, fitted on legs. Underbench cabinets/drawers can be moved from side to side without the use of tools. Electric height-adjustable worktops. Service bridge with free positioning of gas, water and air ventilation taps and fittings. System 10 is a very flexible and solid laboratory furniture system available with a range of different worktop materials, doors, hinges and handles. The system ensures excellent ergonomics with height-adjustable worktops and moveable underbench cabinets....

Open the catalog to page 3
SYSTEM 10 - 4

POINT EXHAUST WEIGHING COLUMN

Open the catalog to page 4
SYSTEM 10 - 5

SERVICE CHASE SINK UNIT

Open the catalog to page 5
SYSTEM 10 - 6

Cabinets and drawers SUSPENDED UNDERBENCH CABINETS Suspended underbench cabinets available with laminate-coated fronts in the following variants: � Door � Drawers x 2 � Drawers x 2+1 � Drawers x 3 � Drawers x 4 UNDERBENCH CABINETS WITH WHEELS Mobile-units is fitted with wheels, of which 2 with brake. DRAWER SLIDES Soft-close slides with 100% pull-out. See pages 29-30 for an overview of all cabinet variants. Top cabinets Top cabinets are available with laminate-coated doors or doors with glass panes with either a laminate or aluminium frame. Dual-access cabinet and glass door with aluminium...

Open the catalog to page 6
SYSTEM 10 - 7

Cabinet accessories HANDLES Drawer and cabinet door handles are as standard, made from stainless steel with a width of 160 mm from centre to centre. The self-holding, nickel plated hinge is externally visible. Opening angle of 270 degrees. D-handle, stainless steel. (CTC: 160 mm) Worktops are available with height-adjust function as an option, with movement of 400 mm (700–1100 mm) Height-adjustable table Stationary table Mobile table

Open the catalog to page 7
SYSTEM 10 - 8

Worktops MATERIALS y Laminate y Compact laminate y Polypropylene (PP) y Stainless steel, 316 y Epoxy resin y Ceramic WORKTOPS RESISTANCE OVERVIEW Organic solvent Acid /Alka Surface unevenness Laminate Compact laminate Polypropylene (PP) Stainless steel, 316 Epoxy resin Ceramic Excellent COLOURS Laminate STANDARD Postshaped laminate STANDARD Compact laminate STANDARD White with black core FM0085FH Grey with black core FM0074FH Solid white Available only in 12 mm FM0085

Open the catalog to page 8
SYSTEM 10 - 9

Profiles, worktops Profiles, sink unit worktops Bordplader Straight front and rear edge. Straight edges with pre-laminated ABS plastic edge band. All edges have raised edges. Post-formed front edge and straight rear edge. Post-formed front edge and grooved rear edge. All edges have raised edges. EPOXY Post-formed front and rear edge. NB! The worktop must be assembled in ader the centre using the special Bordpl fitting. All edges have raised edges. Bordplader COMPACT LAMINATE Bevelled edges. All edges have raised edges. Sink unit worktops are also available with laminate or as compact...

Open the catalog to page 9
SYSTEM 10 - 10

Sink unit The table below shows the combinations available when choosing the worktop type and sink. SINK UNITS Compact laminate Inserted sink All-welded sink Stainless steel (304) / Polypropylene ) Stainless steel (304) / Polypropylene ) Sink, material Glued sink STANDARD Worktop material Stainless steel (304/316) Polypropylene (PP) Epoxy Ceramic SINK SPECIFICATIONS Optional dimensions Bottom Bottom Water trap Overflow Standpipe Connection valve strainer Standard dimensions Stainless steel, 304 (all-welded) Stainless steel, 316 (all-welded) If you require more information, please contact...

Open the catalog to page 10
SYSTEM 10 - 11

Service chase The Labflex service chase is available either as wall-mounted or for island setups. The hatch at the bottom of the service chase provides access for the laying and servicing of installations. Cable and pipe laying from ceiling to floor Cable and pipe laying from ceiling to unit Cable and pipe laying from ceiling to service bridge Continuous service chase Service chase cut at ceiling edge

Open the catalog to page 11
SYSTEM 10 - 12

Installations LIGHTNING LED printed circuit board for installation in the service bridge below the top cabinets. y 4000 K � Brightness: Minimum 1200 lm/m (brightness ~ 1600 lm, equivalent to a 100 W bulb) � Minimum RA90 � Adjustable brightness, 100-10%. Plug-and-Play solution: Only need to connect power. No need for external driver or damper. Wall-mounted service bridge without LED. Wall-mounted service bridge with built-in LED. Standalone island setup and service bridge without LED. Standalone island setup and service bridge with built-in LED. Wall-mounted electrical duct without LED....

Open the catalog to page 12
SYSTEM 10 - 13

Installations ELECTRICITY Electrical sockets are as standard, positioned flush with the service bridge. Single, SCHUKO Double, SCHUKO Triple, SCHUKO Empty back-box, OBO for fitting in duct

Open the catalog to page 13
SYSTEM 10 - 14

Weighing column The weighing column ensures optimal stability in order that precision measuring work can be executed in the laboratory. The weighing column is designed for precise measurements down to four decimal places, and its measuring is independent of the adjoining structure. The weighing column’s design includes vibration damping, and it can either be freely positioned or set in a worktop with a section cut out for the weighing column/weighing stone. The weighing column’s base plate is made from compact laminate and it is secured to the concrete floor using an expansion bolt. The...

Open the catalog to page 14
SYSTEM 10 - 15

Taps Labflex offers taps in different designs. The following pages will show which types Labflex offers as standard. This design is shown on page 16. This design is shown on page 17.

Open the catalog to page 15
SYSTEM 10 - 16

Taps Certified in accordance with ISO 9001 and Danish Gas Technology Centre (DG) approved. Colour codes on the handle are as standard in accordance with EN 13792. WATER Labflex provides taps with a mixing tap or with separate hot and cold taps. Single cold water tap Separate hot and cold mixer tap Single cold water tap with a wrist-action handle Mixer tap with two wrist-action handles Single tap for distilled water GASES Labflex provides as standard all purity variants and gas types. Taps suspended from service bridge: Worktop-mounted taps in service spine: Fitted to worktop Two eyewash heads

Open the catalog to page 16

All Labflex AS catalogs and technical brochures

  1. Tall Cabinet

    1 Pages

  2. Sink Cabinet

    1 Pages

  3. Drawers

    1 Pages

  4. Top Cabinets

    21 Pages

  5. SYSTEM 14

    28 Pages