2138 Dual Action Tamp (DAT) Printer Applicator

Product catalog summary

Overview: The Model 2138 Dual Action Tamp Printer Applicator is designed for thermal transfer or direct transfer imprinting and applying labels using tamp blow or tamp apply techniques. It is capable of labeling any two adjacent panels.

Functionality: The device features a dual action, air cylinder-operated tamp that rotates 90 degrees to apply a front label and extends in a straight line to apply a side panel label. It supports one-to-one print and apply, allowing immediate application of each label as it is printed.

Configurations: The system offers four configurations for labeling the front and either side or the trailing panel and either side.

Specifications:

Dimensions: Height: 36”, Width: 32.5”, Length: 25.75”
Weight: 165 lbs.
Label Dimensions: Width up to 7”, Length up to 6”
Print Area: Up to 6.6” wide, dependent on printer
Label Packaging: 12” O.D. rolls maximum on 3” I.D. cores
Dispense Speed: Up to 12” per second, dependent on printer and label size
Label Placement Accuracy: Up to +/- 1/32”
Electrical: 115 Volts AC, 60 Hz, 5 Amps; 220 Volts AC, 50 Hz optional
Air Requirements: 4 cfm at 60 psi for most applications

Printers Available: Compatible with Sato, Zebra, Datamax, among others.

Contact Information: Label-Aire, Incorporated, 550 Burning Tree Road, Fullerton, CA 92833, Phone: (714) 441-0700, Fax: (714) 526-0300. Distributed by Label-Aire A/S, Industrivej 9, DK-9510 Arden, Denmark, Phone: 459 856 2900, Fax: 459 856 2901. Visit www.label-aire-inc.com for more information.

Catalog excerpts

2138 Dual Action Tamp (DAT) Printer Applicator-1

MODEL 2138 DUAL ACTION TAMP PRINT & APPLY Labels Any Two Adjacent Panels

Open the catalog to page 1

2138 Dual Action Tamp (DAT) Printer Applicator-2

MODEL 2138 PRINT & APPLY DUAL ACTION TAMP N The Model 2138 Dual Action Tamp Printer Applicator thermal transfer or direct transfer imprints and applies labels utilizing tamp blow or tamp apply application techniques. The dual action, air cylinder operated tamp rotates 90 degrees across the conveyor to apply the front label. As the product proceeds, the second straightline stroke extends using the same cylinder to apply the side panel label. One to one print and apply allows for the immediate application of each label as it is printed. Four configurations allow labeling front and either side or...

Open the catalog to page 2