- Catalogs
- L & M Compressor
- Grizzly G520 Five-Stage High Pressure Compressor
Grizzly G520 Five-Stage High Pressure Compressor
Grizzly G520 Five-Stage High Pressure Compressor
- Five-stage high-pressure compressor with radial layout to minimize vibration and crankshaft loading.
- Equipped with a spin-on type oil filter and connecting rods with needle roller bearings.
- Stainless steel valve assemblies are used across all stages, incorporating the latest valve and ring design technology.
- Relief valves are installed on the 1st, 2nd, 3rd, and 4th stages, with intercoolers on these stages and an aftercooler on the 5th stage.
- Features a pressurized oil lubrication system and cast iron block and cylinders.
- Water separators are included on the 2nd, 3rd, and 4th stages.
- Designed and manufactured in the USA.
- Ensures long life, low noise, and high efficiency with reduced heat generation.
- Oil pressure switch, fan guard, and ACD-automatic drain block with solenoid.
- Dimensions: Width 36”, Depth 24”, Height 36”.
- Weight: 460 lbs, Fan Diameter: 29.5”.
- Models available with varying capacities and motor specifications, such as G515-6, G520-6, G525-6, G515-7, and G520-7, with maximum working pressures of 6,000 to 7,500 psig.
- Capacity is referenced to standard inlet conditions (ASME Standard) at 80% of the compressor's maximum working pressure, with a tolerance of +5/-4%.
- Phone: (305) 992-5581
- Email: [email protected]
- Website: LMCompressor.com
- Address: L&M Compressor, LLC, PO Box 773271, Ocala, FL 34477
Catalog excerpts
Grizzly G520 Five-Stage High Pressure Compressor Standard Features Five Stages Relief Valves on 1st, 2nd, 3rd & 4th Stage Latest technology in valve and ring design Connecting rods with needle roller bearings Spin-on Type Oil Filter Stainless steel valve assemblies on all stages Pressurized oil lubrication system Radial layout for reduced vibration and crank shaft loading Cast Iron Block and Cylinders Intercoolers on 1st, 2nd, 3rd & 4th, after cooler on 5th stage Water separators on 2nd, 3rd & 4th stages Long Life Low Noise High Efficiency with Reduced Heat
Open the catalog to page 1
5 Cylinder, 5 Stage Breathing Air Compressor 1) Capacity is referenced to standard inlet conditions (ASME Standard) @ 80% of the compressor's maximum working pressure. Tolerance +5/-4% 2) Specifications are subject to change. 36” (Side to Side) 24” (Front to Back) 36” 460 Lbs. 29.5” Optional Features: Oil pressure switch Fan Guard ACD- Automatic Drain Block with Solenoid
Open the catalog to page 2All L & M Compressor catalogs and technical brochures
- Positive-displacement compressor
- Stationary compressor
- Industrial compressor
- Electrically-powered compressor
- Reciprocating piston compressor
- Lubricated compressor
- Low-noise compressor
- Gas compressor
- Multi-stage compressor
- High-efficiency compressor
- Oil-lubricated compressor
- Nitrogen compressor
- Breathing air compressor
- Natural gas compressor
- CNG compressor