- Catalogs
- L & M Compressor
- Grizzly G510 Five-Stage High Pressure Compressor
Grizzly G510 Five-Stage High Pressure Compressor
Grizzly G510 Five-Stage High Pressure Compressor
- Five-stage high-pressure compressor with radial layout to minimize vibration and crankshaft loading.
- Equipped with a spin-on type oil filter and connecting rods with needle roller bearings.
- Stainless steel valve assemblies are used across all stages, incorporating the latest valve and ring design technology.
- Relief valves are installed on the 1st, 2nd, 3rd, and 4th stages, with intercoolers on these stages and an aftercooler on the 5th stage.
- Features a pressurized oil lubrication system and cast iron block and cylinders.
- Water separators are included on the 2nd, 3rd, and 4th stages.
- Designed and manufactured in the USA, the compressor boasts RPM technology for long life and low noise.
- Oil pressure switch.
- ACD - Automatic Drain Block with Solenoid.
- Width: 27”
- Depth: 24”
- Height: 27.19”
- Weight: 390 lbs.
- Fan Diameter: 17.2”
- Model G507-6: Max Working Pressure 6,000 psig (414 bar), Capacity 9.5 scfm (269 l/min), Motor 7.5 hp (5.6 kW).
- Model G510-6: Max Working Pressure 6,000 psig (414 bar), Capacity 12.5 scfm (354 l/min), Motor 10 hp (7.5 kW).
- Model G507-7: Max Working Pressure 7,500 psig (517 bar), Capacity 9 scfm (255 l/min), Motor 7.5 hp (5.6 kW).
- Model G510-7: Max Working Pressure 7,500 psig (517 bar), Capacity 12 scfm (340 l/min), Motor 10 hp (7.5 kW).
- Capacity is referenced to standard inlet conditions (ASME Standard) at 80% of the compressor’s maximum working pressure with a tolerance of +5/-4%.
- Specifications are subject to change.
- Phone: (352) 484-0850
- Email: [email protected]
- Website: LMCompressor.com
- Address: L&M Compressor, LLC, PO Box 773271, Ocala, FL 34477
Catalog excerpts
Grizzly G510 Five-Stage High Pressure Compressor Five Stages Latest technology in valve and ring design Spin-on Type Oil Filter Presurized oil lubrication system Cast Iron Block and Cylinders Designed and built in the USA Relief Valves on 1st, 2nd, 3rd & 4th Stage Connecting rods with needle roller bearings Stainless steel valve assemblies on all stages Radial layout for reduced vibration and crank shaft loading Intercoolers on 1st, 2nd, 3rd & 4th, after cooler on 5th stage Water separators on 2nd, 3rd & 4th stages
Open the catalog to page 1
5 Cylinder, 5 Stage Breathing Air Compressor 1)Capacity is referenced to standard inlet Conditions (ASME Standard) @ 80% of the compressor's maximum working pressure. Tolerance +5/-4% 2) Specifications are subject to change Dimensions Width Depth Height Weight Fan Diameter 27” (Side to Side) ' 24” (Front to Back) 27.19” 390 Lbs. 17.2” Optional Features: Oil pressure switch ACD- Automatic Drain Block with Solenoid Call: (352) 484-0850 Email: [email protected] Web: LMCompressor.com
Open the catalog to page 2All L & M Compressor catalogs and technical brochures
- Positive-displacement compressor
- Stationary compressor
- Industrial compressor
- Electrically-powered compressor
- Reciprocating piston compressor
- Lubricated compressor
- Low-noise compressor
- Gas compressor
- Multi-stage compressor
- High-efficiency compressor
- Oil-lubricated compressor
- Nitrogen compressor
- Breathing air compressor
- Natural gas compressor
- CNG compressor