• RPM Technology for enhanced performance.
• Long life and low noise operation.
• Five-stage compression with cast iron block and cylinders.
• Pressurized oil lubrication system with needle roller bearings in connecting rods.
• Spin-on type oil filters and ASME relief valves on the first four stages.
• Compliance with CSA/ASME standards for CNG.
• Stainless steel valve assemblies and intercoolers on the first four stages, with an aftercooler on the fifth stage.
• Advanced valve and ring design technology.
• Moisture separators on the second, third, and fourth stages.
• Radial layout to reduce vibration and crankshaft loading.
• Designed and manufactured in the USA.

• Capacity is based on 5 psig inlet conditions and 68°F inlet temperature at 80% of the compressor's maximum working pressure, with a tolerance of +5/-4%.
• One GGE of natural gas equals 126.67 cubic feet at standard conditions.
• Specifications are subject to change.

• Dimensions: Width 36”, Depth 24”, Height 36”.
• Weight: 480 lbs.
• Fan Diameter: 29.5” with a fan guard.
• Auto drain assembly with explosion-proof valve, plumbed to relief valves manifold and separators.
• Oil pressure switch and thermostat with explosion-proof valves.
• Heater and temperature switch with explosion-proof features.
• ASME/CRN and PED relief valves on the first four stages.

Call: (352) 484-0850
Email: [email protected]
Web: LMCompressor.com
L&M Compressor, LLC
PO Box 773271
Ocala, FL 34477