Supports dynamic measurement and medium-speed sampling of all channels at

Decentralized arrangement and simultaneous sampling of all channels. Dynamic measurement you need is now supported! • All channels can be measured simultaneously at • Up to 8 channels per box (64 channels when 8 boxes are • Decentralized arrangement with one wire. • Control Software DCS-100A (Dynamic data acquisition Voltage/thermocouple unit • Frequency response • Isolated between channels Strain unit Large strain (300,000um/m) measurement 24bits high-resolution A-D conversion (O.lum/m) Built-in bridge circuit

■ Examples of Measurements with NTB-500A ^Repetitive loading test for a concrete beam, etc. • Verification of the durability of the structure. • Large strain (300,000um/m) can be measured. Measurement is possible for a wide range of input, supporting composite material near plastic region. Control panel ^Stress measurement for construction machinery including a crane • Simplified measurement at the site. Deflection (strain or displacement) of each part of a construction machine can be measured at the site. • Simultaneous sampling acquisition of all channels is Data acquisitions of all channels...

DC power cable P-76 (Standard accessory for Strain gage Strain gage transducer Sync communication Terminating resistors USB/CAN converter, about 1.4 m Dynamic data acquisition software Four boxes are docked Strain gage Strain gage transducer DC power cable P-76 (Standard accessory for NTB -500A) or AC adapter SA-1 OA-EDS (Optional) USB/CAN converter, about 1.4 m Sync communication Terminating resistors Dynamic data acquisition software Decentralized arrangement Sync Y cable for NTB-500A (Optional) N-120 (0.1 m) Sync communication cable for NTB-500A (Optional) N-l 19 (1 m) USB/CAN converter, about...

Illlllllllllllllllllllllllll Specifications of the Network (1) Applicable sensors and Measurement unit * The accuracies of the thermocouples are not taken into account in the accuracies shown * The reference junction compensator can be selected from the internal and external one. * The thermocouple resistance should be lk ohm or less. Voltage measurement: DC to 100 Hz (Deviation +1 dB, -3dB) Thermocouple measurement: DC to 10 Hz (Deviation +0.5 dB, -1 dB) (9) Insulation Between channels: 50 M ohm or higher at DC500V (10) Dimensions 152.2 (W) x 45 (D) x 6.1 (H) mm (excluding protrusions)

(excluding protrusions) Note: Appearance of the box when one NTB The network terminal box has the following standard accessories . When you unpack the package, make sure that no standard accessories are missing. •Simple software (for modification) •Driver for a USB/CAN converter •Dynamic data acquisition software: DCS-100A *1 •Wire connection seal •Rubber foot •Test Certificate/Warranty 1 for each •Driver holder (with a mini driver) •Dummy panel for NTB-500A (NTBSOO-DUMMY) * 1: This is standard attachment to NTB-500A. *2: Note about a dummy panel for NTB-500A It is mounted on a vacant unit of...

Dynamic data acquisition software (Standard accessory)

Data Analysis Software This software can load a data file in the KYOWA standard format (extension: KS1 and KS2) and play back and analyze acquired data in the file. Movies and voice memos are supported for playback. # Data Reproduction Y-Time graph, X-Y graph, numerical values, file information, and MAX/MIN can be displayed. Statistic operation, arithmetic operation, FFT analysis, frequency analysis, filtering, differentiation/integration, and life span prediction are supported. # Supported Instruments Frequency Analysis Reliability through integration KYOWA ELECTRONIC INSTRUMENTS CO., LTD. Overseas...