*mydirectindustry

O-30-ULGS-100M

Product catalog summary

Description: The O-30-ULGS-100M is a high-performance Oven Controlled Crystal Oscillator (OCXO) designed for ultra-low G-sensitivity, low phase noise, and tight frequency stability. It is housed in a hermetically sealed CO8 metal can package, making it suitable for humid environments and vehicle-mounted applications.

Features:

Ultra Low G-Sensitivity: 0.1 ppb/g
Very Low Phase Noise
Tight Frequency Stability
Electrical Frequency Tuning Input
Reference Voltage Output
Hermetical CO-8 package

Applications:

Instrument Reference
Microwave Communication Systems
Clock Reference for Microwave Signal Sources
Test & Measurement Systems
Radar Systems
Medical (MRT, CT)

Specifications:

Nominal Frequency: 100.000 MHz
Initial Frequency Tolerance: ≤ ± 200 ppb
Frequency Stability (Temperature Range -40°C to +85°C): Class G ≤ ± 50 ppb, Class H ≤ ± 100 ppb
Frequency Stability vs. Supply Voltage Changes: ≤ ± 10 ppb
Frequency Stability vs. Load Changes: ≤ ± 5 ppb
Aging: ≤ ± 5 ppb per day, ≤ ± 300 ppb first year, ≤ ± 1.5 ppm over 10 years
Frequency Tuning Range: ≥ ± 2 ppm
Supply Voltage: +12 V ± 5%
Supply Current: ≤ 150 mA steady state, ≤ 400 mA during warm-up
Warm-up Time: ≤ 5 min
Output Voltage: Sine wave, Initial Output Level: ≥ +7 dBm
Harmonics: ≤ -30 dBc, Spurious: ≤ -100 dBc
Short Term Stability (Allan Deviation): ≤ 0.1 ppb for τ = 1 sec
Phase Noise (Typical): -105 dBc/Hz at 10 Hz, -134 dBc/Hz at 100 Hz, -160 dBc/Hz at 1 kHz, -168 dBc/Hz at 10 kHz, -170 dBc/Hz at 100 kHz and 1 MHz
Jitter (RMS): ≤ 100 fsec
G-Sensitivity Options: G1 ≤ 0.5 ppb/g, G2 ≤ 0.2 ppb/g, G3 ≤ 0.1 ppb/g, G4 ≤ 0.05 ppb/g
Storage Temperature Range: -55°C to +85°C

Environmental Conditions: According to KVG Product Qualification Procedure AA-QM-200.

Marking: Manufacturer's name, date code, specification, nominal frequency.

Case: Style BF9-IS-S-15.0 with pin configuration for control voltage, reference voltage, supply voltage, RF output, and ground.

Ordering Information: Type code includes package code, supply voltage, temperature range, frequency stability, G-sensitivity option, and nominal frequency. Example: O-30C4085H-G1 - 100.000 MHz.

Catalog excerpts

ROHS-Compliant Product O-30-ULGS-100M DESCRIPTION: O-30-ULGS-100M is a high performance ‘Oven Controlled Crystal Oscillator’ (OCXO) optimized for exceptional Ultra Low GSensitivity (ULGS), very low phase noise and tight frequency stability. The part comes in a robust but still small hermetically sealed CO8 metal can package what makes it also suitable for humid environmental conditions. Its low G-Sensitivity makes it a preferred part for any vehicle mounted applications. Ultra Low G-Sensitivity: 0.1 ppb/g Very Low Phase Noise Tight Frequency Stability El. Frequency Tuning Input Reference Voltage Output  Hermetical CO-8 package  Instrument Reference  Microwave Communication Systems  Clock Reference for Microwave Signal Sources  Test & Measurement Systems  Radar Systems  Medical (MRT, CT) KVG Quartz Crystal Technology GmbH Waibstadter Strasse 2 – 4, 74924 Neckarbischofsheim, Germany Tel.: +49 (0) 7263/648-0; Fax: +49 (0) 7263/6196 email: info@kvg-g

Open the catalog to page 1

ROHS-Compliant Product O-30-ULGS-100M 1. Specification Test conditions: VS = +12 V; TA = +25 ± 3 °C; VC = +5 V unless otherwise identified Subject to technical modification

Open the catalog to page 2

ROHS-Compliant Product Phase Noise @ offset frequency: < -100 dBc / Hz < -130 dBc / Hz < -157 dBc / Hz < -166 dBc / Hz < -168 dBc / Hz < -168 dBc / Hz 1. Specification continued Jitter (RMS) 12 kHz to 20 MHz: According to KVG Product Qualification Procedure AA-QM-200 Manufacturer's name, date code (week/year); specification; nominal frequency Subject to technical modification

Open the catalog to page 3