• Integrated controller with switch, save space, installation time and cost • 3.5” color LCD panel, analog gauge-style and digital meter display, multilingual user interface • Built-in Wi-Fi and Bluetooth connectivity—no additional communication module required • Monitors and displays full-phase voltages, phase loss, frequency, and reverse phase sequence for both utility and generator power sources • Equipped with both electric and manual operation functions, featuring mechanical and electrical interlock protection to prevent simultaneous connection of utility and generator power sources to the load. • Equipped with Lockout-Tagout (LOTO) to prevent accidental energization that may cause electric shock or equipment damage • All settings can be configured directly on front panel or through Bluetooth connection with a smartphone • Provides auxiliary contact outputs for both utility and generator power sources • PTS firmware can be updated via Wi-Fi network or USB connection to a PC • Controlled pause at the OFF position for both utility and generator power sources during transfer • Supports automatic exercise scheduling configurable from 1 to 4 weeks. • Main transfer switch is available in Class CB or PC; When a Class CB breaker trips, a message will be displayed accordingly. • All fault messages are accompanied by an alarm sound to alert the user • Stores up to 250 event logs to facilitate fault tracking and analysis • Provides one set each of user-selectable from assigned function output and input contacts. • Programmable pause period in Auto Mode to prevent unnecessary generator operation (DC power input required) • Optional ATSC403B enables synchronized operation and monitoring. • Compliant with IEC 60947-6-1 International standard, AC-33A utilization category, and UL 1008 Type A standards • Features remote diagnostic capability with code displays for settings, sensor status, and input voltage, enabling factory technicians to analyze unexpected events. TAIWAN Patent No. I881448 U.S. Patent Pending China Patent Pending • Free iOS and Android GenOnCall®App for user to download • Offer push notifications for ATS status and event logs for queries. • Allows one operator and up to seven viewers to remotely operate, monitor the status, and adjust all relevant settings for the generator set via network access simultaneously. ^ The blue text indicates remote connection feature. KUTAI offers a 60 days free trial for the remote connection feature, allowing user to monitor the ATS anytime. M Class CB : Provides over current protection. The main contacts are capable of making and breaking short circuit currents. *2 Class PC : Capable of making and withstanding short-time short-circuit current, but not expected to break short-circuit current._ Electrical Specifications_Adjustable Timer Settings Operating Voltage (Ue) Refer to Model Description Field TDEN Time Delay Emergency to Normal 0 to 999 seconds Rated Frequency 50/60 Hz TDNE Time Delay Normal to Emergency 0 to 250 seconds Remote Start Signal Output 7A @ 250 Vac Max. TDES Time Delay Engine Start 0 to 15 seconds Utility Power Input Auxiliary Contact Output 3A @ 250 Vac Max. TDEC Time Delay Engine Cool-down 0 to 250 seconds Generator Power Input Auxiliary Contact Output 3A @ 250 Vac Max. TDOF Time Delay in OFF position 0 to 99 seconds Physical Specifications Dimensions 2P/3P : 500.0 (L) x 376.0 (W) x 230.2 (H) mm 4P : 590.0 (L) x 376.0 (W) x 230.2 (H) mm Weight 2P : 17.9 Kg ± 2% / 3P : 19.9 Kg ± 2% / 4P : 24.4 Kg ± 2% Optional Accessory C400-3/C400-4 Terminal Cover Set ATSC403B Extended Operation Display Module ANK92 Wi-Fi Antenna with Base KCU-IF Interface for KCU Communication Module KCU-05 Modbus-RTU Communication Module KCU-06 SNMP Communication Module KCU-07 Modus TCP/IP Communication Module KCU-31 Ethernet Dynamic IP Communication Module KUTAI ELECTRONICS INDUSTRY CO., LTD. TEL : +886-7-8121771 FAX : +886-7-8121775 Website : www.kutai.com.tw Headquarters : No.3, Ln. 201, Qianfu St., Qianzhen Dist., Kaohsiung City 806037 Taiwan