G©U-3©©© Digital Gen-set PLC Control Unit Provides Full Instrumentation & Protection on Any Generator Set • Micro-Processor Auto Control & Protection • Easy to Read Large LCD Display • Modularity Design, Easy to Install • Provide Accurate Temperature and Oil Pressure Display • Provide Full Engine & Generator Alarms Signals Shutdowns • All Settings Can Be Done Directly on GCU-3000 or PC Connection *1 • Provide Emergency Stop and Voltage Adjustment on Front Panel *2 • Total of 15 Memorable Event Logs • Optional USB / RS485 / Ethernet Remote Communication Functions • J1939 CAN Bus Protocol Available. (Option) *1 Customized settings are auto-saved into memory and will remain even when power is off. *2 Provide gen-set run-in modulate model and manual start and stop functions, when user proceed modulate controller will shut down all protect functions. • Programmable Display with 3 Phase Volts, Amp & Freq. • Engine Operation Hours & Battery Voltage Display • Can Display Different Unit Of Temperature & Oil Pressure • Failure Signal Status By Graphic Display • Engine Start Failure • Engine Over Speed • Sensor Failure • Abnormal AC Voltage • Low Engine Oil Pressure • Emergency Stop Activated • High Engine Temp. • MPU Failure • Generator Over Load • Abnormal Battery Voltage Specifications Power Input Voltage 8 to 60 Vdc (12V/24V) MPU Signal Input Voltage +/-2 to +/-70 Vac AC Sensing Input Voltage 15 to 500 Vac Frequency Min. 100 Hz Max. 10 KHz Frequency 50/60 Hz CT Specification Burden 2.5 VA Power Dissipating Max. 7 watts KUTAI ELECTRONICS INDUSTRY CO., LTD. TEL : +886-7-8121771 FAX : +886-7-8121775 Website : www.kutai.com.tw Headquarters : No.3, Ln. 201, Qianfu St., Qianzhen Dist., Kaohsiung City 80664, Taiwan