GCU-14R
4Pages

Catalog excerpts

GCU-14R (12/24V) Prewired Relay Module KUTAI ELECTRONICS INDUSTRY CO., LTD. TEL : +886-7-8121771 FAX : +886-7-8121775 Website : www.kutai.com.tw Headquarters : No.3, Ln. 201, Qianfu St., Qianzhen Dist., Kaohsiung City 806037, Taiwan

Open the catalog to page 1

GCU-14R PREWIRED RELAY MODULE SECTION 1 : INTRODUCTION GCU-14R Relay Module is designed to simplify wiring between the Genset control module, Kutai’s DSP-10 display module and the genset. The Module is ready with male spade terminals; fuses and power relays. The power relays are used in the high current Preheat, Start, and Stop circuits. The Module is insulated with high anti-corrosion epoxy, suitable for use in the hostile environment inside the genset control panel. GCU-14R saves time and money when wiring the control panel. The working voltage can be changed from 12 Vdc to 24 Vdc by...

Open the catalog to page 2

SECTION 3 : GCU-14R TERMINAL DESCRIPTION 3.1 External Wiring Terminal J3 PIN NO. Connect to Alternator Phase L3 (10  500 Vac Rated) Connect to Alternator Phase L2 (10  500 Vac Rated) Connect to Alternator Phase L1 (10  500 Vac Rated) Connect to Alternator Phase N Connect to Battery Positive ( V ) Pre-heat Signal Output ( V ) Connect to Battery Negative ( V ) Connect to Internal Heater (Rated Output 35 Amp) Start Signal Output ( V ) Connect to Starter Motor (Rated Output 35 Amp) Stop Signal Output ( V ) Connect to Fuel Solenoid or Valve Control (Rated Output 35 Amp) Connect to Panel...

Open the catalog to page 3

SECTION 4 : RECOMMENDED WIRING DIAGRAM 4.1 Three Phase Recommended Wiring Diagram GCU GENERATOR CONTROL UNIT 4.2 Single Phase Recommended Wiring Diagram GCU GENERATOR CONTROL UNIT Please link to http://www.kutai.com.tw for detailed manual ___________________________________________________________________________________________ 4

Open the catalog to page 4

GCU-14R 4Pages

Catalog excerpts

All Kutai Electronics Industry Co. catalogs and technical brochures

GCU-14R
4Pages