Excitation Boost System EPMG® converts DC battery power into a separate excitation source to provide “boost” for self-excited (shunt) generators during heavy transient loads - providing PMG performance for much less cost • EPMG® installs quickly and easily in series with any AVR (excitation current below 8A) in a self-excited generator • EPMG® converts genset battery and/or other battery power into a separate excitation power source for dynamic response for heavy load used such as motor starting and short circuit situations - operating only when required • Upgrades self-excited generators to PMG type performance • Battery voltage abnormal / reverse polarity / current limiting protections • Power output self-test • Built-in DC fuse protection • Low power consumption when not in use (hibernate mode) Test LED Self-Test in progress Output (V) = Gain x (Droop voltage / Rated voltage) Batt-Volt led Battery voltage abnormal Environment F+ Existing Voltage Regulator F-Sensing S1 S2 OUT+ EPMG-1270/2470 OUT-B+ B-Battery Physical Specifications Dimensions 175.0 (L) x 115.0 (W) x 104.0 (H) mm 6.89 (L) x 4.53 (W) x 4.09 (H) inch Weight 2.9 kg +/-2% Accessories Connection wire White x 2 Brown x 2 Screw bolt M6L20 x 4 KUTAI ELECTRONICS INDUSTRY CO., LTD. TEL : +886-7-8121771 FAX : +886-7-8121775 Website : www.kutai.com.tw Headquarters : No.3, Ln. 201, Qianfu St., Qianzhen Dist., Kaohsiung City 80664, Taiwan