Universal Electronic Engine Governor Controller Engine Start Smoke Limiting & Idle Speed settings Works with External, Built-in and PT-Pump type and hydraulic drive actuators Newly added "extreme slow response" engine setting Features • Can be used in a wide range of input frequencies • 15Amp maximum current output • Suitable for all diesel, natural gas, and petrol (gasoline) engines • Fast response time limits variations in speed (high stability) • Injected epoxy housing provides high resistance to moisture, vibration, and oxidation • Can connect with external potentiometer for remote speed control • Adjustable Engine Idle speed setting • Accepts analog signal inputs from other controllers to control speed Static Power Consumption Less than 1 Watt @ 12 Vdc Less than 2 Watt @ 24 Vdc Control Characteristic Settings|_DIP Switch Settings DROOP Speed Droop setting SW1-ON 600 to 1200 Hz GAIN Gain setting SW2-ON 1200 to 2500 Hz RAMP Ramp Time SW5-ON Cummins PT PUMP IDLE SPEED Idle speed setting SW6-ON Extreme slow response engine RUN SPEED Operating speed setting Physical Specifications Dimensions 147.0 (L) x 114.0 (W) x 50.0 (H) mm *All manufacturer names and numbers are used for reference purpose only and do not imply that any part is the product of these manufacturer. KUTAI ELECTRONICS INDUSTRY CO., LTD. TEL : +886-7-8121771 FAX : +886-7-8121775 Website : www.kutai.com.tw Headquarters : No.3, Ln. 201, Qianfu St., Qianzhen Dist., Kaohsiung City 80664, Taiwan