ECU-04 / ECU-05 Auto-Start module for Manual Key Start Gensets Adds auto start or remote start capability to any key start genset Features  Microprocessor-based engine control unit adds remote start and stop capability from an external Start / Stop signal  Terminals connect directly to key start switch, requiring no change to wiring  Compact size and low power consumption  For use with both diesel and gasoline engine generators  Multiple Cranking attempts in case of failed start  Circuits protected with 94-V0 Epoxy for installation in harsh environments  Able to control “Energize to Stop” engines (ECU-05)  Adjustable time delay potentiometers – “Engine Preheat” time or Engine Shutdown timer (depending on mode) and Starter Cranking time  User defined auxiliary output indicates whether engine is running (open) Specifications DC Power Supply Ignition & Accessories Signal Output Alternator Input Range Start Signal Output Pre-Heat or Carburetor Signal Output Auxiliary Signal Output Frequency Static Power Consumption Less than 0.03 watts Time Delay Setting And Alarm Indicators L1 Remote start activated indicator LED Generator running indicator LED Start fail indicator LED Engine Pre-Heat time adjustment (1 to 20 seconds) Starter cranking time adjustment (1 to 20 seconds) Function selectable switch with Pre-Heat Pre-Heat function with carburetor energize to stop function Operating Temperature Relative Humidity Physical Specifications Dimensions KUTAI ELECTRONICS INDUSTRY CO., LTD. TEL : +886-7-8121771 FAX : +886-7-8121775 Website : www.kutai.com.tw Headquarters : No.3, Ln. 201, Qianfu St., Qianzhen Dist., Kao