PTS Dedicated Remote Operator Display Module The ATSC403B can be installed on the cabinet panel. This allows users to operate the system, monitor the real-time status of the ATS, and configure parameters directly from outside the cabinet without opening the door, significantly enhancing operational convenience and safety. • Connected to the PTS controller via two USB Type-C cables • Microcontroller-based program control with IP65 Rating dust tight and against low-pressure water jets. • Equipped with a 3.5-inch color LCD, synchronized with the PTS controller • Multi-function rotary knob; all settings can be operated directly from the panel • Panel mounting design for convenient direct operation and monitoring outside the enclosure. • Supports numerical and analog meter display for convenient real-time power value measurement. • Multilingual interface options: Traditional Chinese, English, Japanese, and Spanish • All fault messages are accompanied by an audible alarm to alert the user. • Built-in radar sensing function: when the device is in sleep mode, it automatically detects approaching users and wakes the screen instantly. ^ For operation of this display module, please refer to the PTS-400 User Manual Operating Voltage 5Vdc Operating Temperature -20 to +50 °C Static Power Consumption Less than 0.8W Storage Temperature -30 to +80 °C Display Resolution 480 x 320 pixel Relative Humidity 90% max. Retaining Clips 2 pcs Dimensions 112.0 (L) x 176.0 (W) x 34.7 (H) mm PTS Type Programmable Automatic Transfer Switch (ATS) 0.71 lb +/- 2% KUTAI ELECTRONICS INDUSTRY CO., LTD. TEL : +886-7-8121771 FAX : +886-7-8121775 Website : www.kutai.com.tw Headquarters : No.3, Ln. 201, Qianfu St., Qianzhen Dist., Kaohsiung City 806037, Taiwan