Automatic Mains Failure Control & Protection ModuleFeatures • Micro-processor auto control & protection • Easy to read high light LED display • Modularity design, easy to install • Compact size with vibration protected • IP65 rated waterproof front panel • Provide full mains and genset alarms signals shutdowns • Direct operation on front panel with program settings auto-save in non-volatile random-access memory (NVRAM) • Universal LED graphic interface, displays ATS and genset status and failures • Optional USB / RS485 / Ethernet remote communication functions • Free APP for monitor and operate your ATS & genset directly from your smart phone *Customized settings are auto-saved into memory and will remain even when power is off. • Programmable Display with 3 Phase Volts, Amp & Frequency • Engine Operation Hours & Battery Voltage Display • Internal Program Settings & Status • Failure Signal Status by Graphic Display • Engine Start Failure • High Coolant Temperature • Engine Over Speed • Abnormal AC Voltage • Low Fuel Level • Maintain Service Alarm • Emergency Stop • Low Oil Pressure • Engine Under Speed • Generator Over Load • Abnormal Battery Voltage • Two user definable inputs Frequency 50/60 Hz Power Dissipating Max. 5 watts Rated Output Capacity DC 10 Amps @ 12/24 Vdc Environment Operating Temperature -20 to +60 °C KUTAI ELECTRONICS INDUSTRY CO., LTD. TEL : +886-7-8121771 FAX : +886-7-8121775 Website : www.kutai.com.tw Headquarters : No.3, Ln. 201, Qianfu St., Qianzhen Dist., Kaohsiung City 80664, Taiwan