Brochure
1Pages

Best suitable for blast cleaning, de-burring, de- scaling, removing thin deposits on soft metallic parts and de-flashing of plastic and molded components. It is also used to provide matt finish. The abrasives used are medium to fine grade size BS MESH 25 or finer. It is also used for stress relieving and shot peening for low medium peening intensity. These machines works on induction-suction principle of abrasive blasting. Three standard models are available namely, KUS TECHNICAL SPECIFICATIONS Model with Suffix 'R' are supplied with Remote Control for On / Off in operators hand. Production output is approximate and can vary depending upon the job conditions and cleaning quality required. These data are for the purpose of guidance LOW PRESSURE PORTABLE BLASTER WITH DUMP VALVE J OPERATOR'S SAFETY WEARS Suitable for Low intensity Blasting on Thin Sheets, Wood, Glass. Specially designed for Glass Bead REMOTE CONTROL & DEADAAAN HANDLE Used in 'Remote' versions of Portable Abrasive Blasting machines. Consists of the Exhaust Valve unit also. The Abrasive Blasting process generates dust and noise. The operators needs protection while working in such environment. Operator safety wears is a set of items which he must use while exposed to abrasive blasting environment for safe and hazard free working. Follwing safety wears are offered by KUSHAL UDHYOG for safe and hazard free working : Airfed Helmet Model 'KU-2 Operator's Suit Hand Gloves Helmet Hose j BLAST ROOM SYSTEMS To Perform Blast Cleaning of area. Blast Room Features : Blast Room Enclosures (Masionary / Sheet Construction). Blast Room size varies to suit maximum component size. Portable Abrasive Operator Safety Wears Blasters With Abrasive Recovery / Re-Cyclinng System and Seperator Unit (Pneumatic / Note : The above datas are for guidance only. Dust Collector (Cyclone Cartridge Element type)