MaxLock Multi-Axis Vise page 8-9 DoveLock™ Dove Tail Vise page 7 DoveLock™ Quick Change Jaw System page 4 VersatileLock Vises pages 42-49

FIND THE BEST SOLUTION FOR YOUR APPLICATION Knee Type Mills Manual Mills Pallet Changers for HMC’s Pallet Changers For VMC’s Surface Grinders Double Vise VISE TYPES Pallet Vise Self Centering Single Vise Tower Vise General Purpose Machining High Horsepower Machining High Precision Machining Large Parts Small Parts “Pull-Type” Jaw Clamping 80,000 PSI Ductile Iron Base Air Operated Clamps Dissimilar Size Parts Hydraulic Operation (Hand or Foot Actuated) Internal Hex Available Machinable Jaw Available Manual Operation Metric Version Available Quick Change Jaw Reverse Screw Available Edge Clamp Modular...

DOVELOCK™ QUICK CHANGE JAW SYSTEM Two models available: Model: DJ6 Master Jaw Kit (English) Model: DJ6M Master Jaw Kit (Metric) PATENT PENDING • Quick change for fast setups in under 1 minute. DoveLock jaws are changed from the top by loosening 3 quick-clamps. Jaws can be removed from the front or side. • Workstop for position repeatability to ±0.001". • Aluminum jaws are machined not extruded. • Jaws are machinable for part profile or steps. • Jaws can be turned 180° to do 2 different setups. • Machinable jaws sold separately and available in 6, 7, 8 and 10 inch widths. • Master jaw set and...

KURT TOOLROOM VISE Model: KTR35 An extremely versatile vise that can fit on the smallest machine tables with ease. The overall length including hex is 10.125" and weighs only 20 pounds. The jaw is 3.470" wide with a maximum opening of 3.81" on the bed, and 4.06" in step of jaw. The vise is fully chip guarded. Mounting can be accomplished through the body or with outrigger toe clamps mounted to the outside of the body (sold separately). All sides of the vise are ground and can easily be mounted on its side with the toe clamps (sold separately). Four cavities in the ends of the body make mounting...

5 AXIS WORKHOLDING OPTIONS 5 axis workholding options to save time and money Solutions for medical, oilfield, aerospace and mold/die work. MaxLock™ self-centering vises Self-centering multiaxis vises for 5 axis machining in 2.5" and 4" jaw widths, adjustable centerline, machinable jaws. See page 8 DoveLock DoveLock™ dove tail vise is a 5 axis workholding for today’s aggressive machining needs and eliminates deflection or clamp creep when under high machining pressure. See page 7 MaxLock™ 350 vises Flexible design to hold parts from 0.15" up to the size of your table. Available with risers. See...

DOVELOCK™ DOVE TAIL VISE Model: DT20 DoveLock™ dove tail vise is a 5 axis workholding solution for today’s aggressive machining needs. Manufactured from pre-hardened 4140 steel, the Dovelock maintains part rigidity and minimizes deflection or clamp creep when under high machining pressure. Deflection is reduced by the unique Kurt design which features the clamping screw location high up in the clamping envelope. Additionally, more anti-deflection control is achieved by the movable jaw slide which is retained within the stationary jaw. Dovelock has a full 1/2" stroke making part prep easier than...

Models: SCMX250 and SCMX425 Features: • Self-centering vise for five axis machining • ±0.0002" repeatability • Adjustable Center Line • Machinable Jaws • The customer will machine in a step for higher accuracy eliminating the need for parallels • Hold up to a 6-1/2" long parts with model SCMX425 • Clamp both OD and ID • Kurt AngLock design pulls the part down • 2-1/2" & 4" jaw widths • Tall jaws for increased spindle clearance • Jaws are reversible • Flexible mounting options • Hex keys required for jaw removal: SCMX250: 5/64", 3/32" SCMX425: 3/32", 1/8" MaxLock™ SCMX250 (shown with optional...

MAXLOCK™ MULTI-AXIS ANGLOCK® VISE Model: MX350 • Kurt AngLock Design pulls the part down. • Pull Type feature decreases stationary deflection. • 0.625" stroke – Allows for wider range of clamping before having to change setup. • Modular Design – Mounts on two inch grid patterns when removed from the riser and “T” slots or center hole grids 100mm and under. • When mounted in a two inch grid the vise comes with locator bolts for quick alignment. • When mounted on the risers, precision 5/8 holes have been added so Kurt sine keys can be used for quick alignment. • Auxiliary clamping slots – allows...

PATENT PENDING The Kurt SDW25II SideWinder is a vise that mounts vertically to the back of any Kurt industry standard 6" vise. The SideWinder includes a stabilization leg that will mount to the table on the movable end of the vise and a workstop to position the height of the part. Purpose: For doing 2nd op work holding the part vertically rather than horizontally. Advantage: • Saves set up time for 2nd op vertical work • Machining can be done on both vises in the same setup • Vise is at an elevated position which is more conducive to longer reach machining • Has a stabilizer foot for vibration...

LOCATING PIN FOR FASTER SETUP'S ADJUSTABLE PART STOP 5.0" OF ADJUSTMENT. ADJUSTABLE PART STOP 5.0" OF ADJUSTMENT. 1.50 ADJUSTABLE SUPPORT FOOT. ADJUSTABLE SUPPORT FOOT. 0.531 PRECISION SURFACE FOR LOCATION REPEATABILITY. MACHINE TABLE / BOTTOM OF VISE www.kurtworkholding.com | Toll Free Phone 1-877-226-7823 | Toll Free Fax 1-877-226-7828 | Phone 763-574-8309 | Fax 763-574-8313

PATENT PENDING The Kurt SDW35 SideWinder is a vise that mounts vertically to the back of any Kurt industry standard 6 or 8" vise. The SideWinder includes a stabilization leg that will mount to the table on the movable end of the vise and a workstop to position the height of the part. Purpose: For doing 2nd op work holding the part vertically rather than horizontally. Advantage: • Saves set up time for 2nd op vertical work • Machining can be done on both vises in the same setup • Vise is at an elevated position which is more conducive to longer reach machining • Has a stabilizer foot for vibration...