Kurt Hydraulic Clamping Systems

SWING CLAMP CYLINDER DESIGN & FEATURES (1) Treatment Benefit from Our Wide Range of Options. The KURT 360° ADVANTAGE represents our complete precision manufacturing product offering. Gain powerful manufacturing advantages from a wide range of Hydraulic Clamps & Pumps. Index Swing Clamp Cylinder . . . . . . . . . . . . . . . . . . . . 2 Swing Clamps - Introduction . . . . . . . . . . . . . . . 3 Series 030 Swing Clamps . . . . . . . . . . . . . . . 4-5 Series 040 Swing Clamps and Jam Nuts . . . . 6-7 Series 050 Swing Clamps . . . . . . . . . . . . . . . 8-9 VT Series Link Clamp . . . . . . . ....

SWING CLAMPS - INTRODUCTION Kurt Workholding introduces a wide range of Swing Clamps having clamping capacity of 475 lbs. to 6,000 lbs. at 5,000 PSI. The single cylinder design powers both the swing and clamp force cycle. The single cylinder swing clamp design allows for the clamp to swing left or right when unclamping to allow access to remove the part. Loading and unloading are a much easier task with the swing clamp design. There are three types of Clamping Cylinders. Upper Flange Swing Clamp Lower Flange Swing Clamp Link Clamp Work Support Work Support Threaded Cylinder Upper Flange Swing...

030 SERIES SWING CLAMPS 030 Series Hydraulic Swing Clamps, Bottom Flange Manifold Mounted or Threaded Port Application • Attachment of the cylinder body to the fixture platen is done with 3 or 4 S.H.C.S. The connection type can be either manifold mounted or threaded port. Can be single or double acting as well. Feature Single acting • Hydraulic clamping and spring return for unclamping to original home position. Requires only one hydraulic line. Double acting • Hydraulic control of clamping and unclamping. • Can be clamped and unclamped with a solenoid valve or directional valve. Note • Evacuating...

030 SERIES SWING CLAMPS Cylinder Type SINGLE - ACTING DOUBLE - ACTING Operating Pressure Clamp Arm (order separately) Single Acting System www.kurtworkholding.com | Toll Free Phone 1-877-226-7823 | Toll Free Fax 1-877-226-7828 | Phone 763-574-8309 | Fax 763-574-8313

040 SERIES SWING CLAMPS 040 Series Threaded Body With Threaded Port Application • Cylinder body is attached to the fixture platen by one or two threaded Jam nuts. Can be single or double acting as well. Feature Single acting • Hydraulic clamping and spring return for unclamping to original home position. Requires only one hydraulic line. Double acting • Hydraulic control of clamping and unclamping. • Can be clamped and unclamped with a solenoid valve or directional valve. Note • Evacuating chips from around shaft and cylinder body will increase the life of the cylinder. Coolant should also be...

040 SERIES SWING CLAMPS Cylinder Type SINGLE - ACTING DOUBLE - ACTING Operating Pressure Clamp Arm (order separately) Double Acting System www.kurtworkholding.com | Toll Free Phone 1-877-226-7823 | Toll Free Fax 1-877-226-7828 | Phone 763-574-8309 | Fax 763-574-8313

050 SERIES SWING CLAMPS 050 Series Upper Flange Manifold Mounted or Threaded Port Application • Attachment of the cylinder body to the fixture platen is done with 3 or 4 S.H.C.S. The connection type can be either manifold mounted or threaded port. Can be single or double acting as well. Feature Single acting • Hydraulic clamping and spring return for unclamping to original home position. Requires only one hydraulic line. Double acting • Hydraulic control of clamping and unclamping. • Can be clamped and unclamped with a solenoid valve or directional valve. Note • Evacuating chips from around shaft...

050 SERIES SWING CLAMPS Cylinder Type SINGLE - ACTING DOUBLE - ACTING Operating Pressure Clamp Arm (order separately) See These Additional Accessories WS-BL Work Support Swing Clamp Arms Page 17 Hydraulic Pump and Hydraulic Intensifier Double Clamp Arm Page 17 www.kurtworkholding.com | Toll Free Phone 1-877-226-7823 | Toll Free Fax 1-877-226-7828 | Phone 763-574-8309 | Fax 763-574-8313

VT SERIES LINK CLAMP VT Series Link Clamp Description The clamping mechanism on this series of hydraulic clamping cylinders works on a lever principle. As the piston is pushed forward the clamp mechanism is pushed down. This type of clamp provides a larger clamping force than of a swing clamp of equal size. Main parts of the clamping mechanism are mounted outside of the cylinder body for convenient maintenance if needed. • Minimum operating pressure: 355 Lbs / 25Kg/cm2. • Maximum operating pressure: 995 Lbs / 70Kg/cm2. • Double acting and single acting • Cylinder body is made of aluminum alloy...

TC CLAMPING CYLINDER TC Series Hydraulic Threaded-Body Cylinders Description The Threaded Body Clamping Cylinders are designed for part holding, part positioning or ejection of a workpiece. Clamping force is applied to the workpiece within the designated clamping stroke to secure the part. They may also be used to pre position a part or aid in ejection of a workpiece. The mounting manner for this Threaded Body Clamping Cylinder is shown in the drawing below. This drawing illustrates dimensional data for clamping cylinder. This type of mounting needs a Teflon packing (included) in order to avoid...

WS-BL WORK SUPPORT WS-BL Low Pressure Work Supports • Collet design can produce larger supporting force than a sleeve design. • Larger supporting forces can be provided in a compact body making for better performance and stability even at low clamping pressure. • Larger supporting forces prevent work piece chatter caused by the cutting load and vibration. • It is not necessary to machine an air vent or oil passage for mounting to base with a thread body style work support thus making threaded body work supports user friendly. • The wiper makes less contacting force with the rod which results...

WS-BL WORK SUPPORT • VSQ SERIES WS-T26BL Max. Flow Rate L / MIN-GPM VSQ Series Valves • This valve is suitable for a second circuit which must have a lower pressure and lower flow rate. • The active pressure of the second circuit can be adjusted with the adjustable nut. • Includes one filter with a setting below 50um • Non-Leak seal design • Two mounting types: Manifold mounted and threaded port. www.kurtworkholding.com | Toll Free Phone 1-877-226-7823 | Toll Free Fax 1-877-226-7828 | Phone 763-574-8309 | Fax 763-574-8313