Kurt 5-Axis Workholding
8Pages

VISES, BASES, PALLETS & TOMBSTONES

DoveLock™ Dovetail 5 Axis Vise • oveLock™ dovetail vise for 4 and 5 axis CNC D machining with access to five sides of the workpiece. • anufactured from pre-hardened 4140 steel, the M DoveLock maintains part rigidity and minimizes deflection or clamp creep when under high machining pressure. • eversible models allow for a wide range of dovetail R widths. • igh clamping screw location reduces deflection. H • ovable jaw slide is retained within the stationary M jaw and creates more anti-deflection control. • mbedded locating pin keeps part location accurate E when applying side load pressure....

• Designed with 2 sets of jaws, Serrated and Dovetail (shipped with serrated jaws). • Each set of jaws has 3 different clamping areas, at the bed, in the middle of the jaw and at the top of the jaw. See table below. • Combats lift with new Kurt lift control system. • ±0.0005" repeatability. • 80,000 psi Ductile iron body for rigidity and vibration damping. • Hardened ways. • 4140 heat treated steel jaws. • 3/4" screw diameter for strength. • Heavy duty bolt down with 1/2" cap screws. • Screw internally hexed for a smaller footprint. • Center line on vise easily adjusts to the center of...

MaxLock™ 5 Axis Vise • Self-centering vise for five axis machining. • ±0.0002” repeatability. • Adjustable Center Line. • Machinable Jaws - choice of aluminum or steel. • The customer will machine in a step for higher accuracy eliminating the need for parallels. • Holds up to a 6-1/2” long parts with model SCMX425. • Clamp both OD and ID. • Kurt AngLock design pulls the part down. • 2-1/2” & 4” jaw widths. • Tall jaws for increased spindle clearance. • Jaws are reversible. • Flexible mounting options. • Hex keys required for jaw removal: SCMX250: 5/64”, 3/32” SCMX425: 3/32”, 1/8”...

BP8 5 Axis Adapter Plates • esigned to cover a wide range of vises and a wide D range of tables. • he mounting slots are designed to be covered up T when a vise is mounted to keep clear of chips. • n easier way to mount Kurt 5 axis vises to a A machine table. Locating Spud Mounting Bolts Part Number BP8-244 (5 Axis 8.0 Base Plate) 8 Inch Round Base Plate BP8-53 (5 Axis 8.0 Base Plate Cover) Base Plate Cover Bottom View Side View Example Setups

• urt AngLock Design pulls the part down. K • ull Type feature decreases stationary deflection. P • .625" stroke – Allows for wider range of clamping before having 0 to change setup. • odular Design – Mounts on two inch grid patterns when M removed from the riser and “T” slots or center hole grids 100 mm and under. • hen mounted in a two inch grid the vise comes with W locator bolts for quick alignment. • hen mounted on the risers, precision 5/8 holes have been W added so Kurt sine keys can be used for quick alignment. • uxiliary clamping slots – allows the customer more flexibility in A...

High clamping force (up to 40 kN] exactly where it is needed, by incorporating the tension spindle directly below the work piece support. Form fit clamping with embossing pins. No pre-embossing required. No flare out of the jaws under tension, no distortion on machine table. Extreme rigidity permits maximum cutting forces. The special design and a clamping depth of just 8 mm permits obstruction free machining on 5 sides. Any desired clamping width, limited only by the size of the machine table. The two clamping jaws, one fixed and one moving, can be positioned at any desired distance...

Mini ToolBlox™ Designed to fit a wide range of machine tables. Easily handles a variety of KURT 5 axis vises and MiniLock systems. Machined from solid aluminum. Weighs only 22lbs. and easily handle by today's CNC machines. MiniLock Clamps Ideal for use with KURT Mini Tombstones or for palletizing small parts to be loaded into receivers. When a quarter turn is applied to the screw, the split clamp jaw is forced both laterally and down, precisely clamping the part and preventing part lift. Clamping jaw made from rugged Ampco 18 aluminum bronze. Actuating screw is made from a special alloy...