Catalogs >
Kurt J Lesker >
MagiDrive Rotary Feedthroughs

MagiDrive Rotary Feedthroughs
2Pages

Catalog excerpts

MAGIDRIVE UHV SERIES Magnetically-Coupled Rotary Drives Features • Over 700 versions. All CF flange sizes. Manual, pneumatic, DC and stepper motor actuated • High torsional rigidity/stiffness, with up to 40Nm (29.5lbf ft) of torque. Zero backlash under low load • No damage if torque limit is exceeded - drive decouples and locks onto the next magnetic pole. No downtime, repair or replacement required. Ideal for UHV and production applications. • No welds. Inherently safe from leaks. Ideal for hazardous gases or critical applications. • Customized extension shafts are available upon request, and for longer shafts we offer a range of extended bearing housings to support the shaft along its axis of rotation. Dual shaft versions are also available. • Hollow drives with up to 90mm bore allow additional axes of motion and/or services to be fed through the center. • Bakeable to 250°C including magnets. 450°C drive options • True UHV performance • 3D models and 2D drawings available for downloading

Open the catalog to page 1

Hollow MagiDrive Model Hollow configuration compact rotary feedthroughs with a CF flange at the rear allow additional MagiDrives to be mounted, providing further axes of rotation. The hollow configuration also allow services to pass through the center of co-axial combinations of drives. Up to four axes of independent rotation can be configured for sophisticated manipulation requirements. DOUBLE SIDED EXTENDED BEARING HOUSING ONTO M5 TAPPED HOLE IN DRIVE OUTPUT SHAFT MOUNTING ONTO DRIVE SPIGOT FLANGE MOUNTING ONTO DRIVE SPIGOT FLANGE Kurt J. Lesker Company (KJLC®) specifications and/or test...

Open the catalog to page 2

MagiDrive Rotary Feedthroughs 2Pages

Catalog excerpts

All Kurt J Lesker catalogs and technical brochures

MagiDrive Rotary Feedthroughs
2Pages