Jena Rotary Technology Limited Precision Rotary Tables Web: www.jena-tec.co.uk Email: [email protected] Willow Drive, Sherwood Drive, Annesley, Nottingham NG15 0DP, United Kingdom.

PRECISION ROTARY TABLES MRT230 Motorised Rotary Table General Specification The MRT230 has an alloy base casting for lightness and may be bolted to a machine bed via two bolt lugs on the table centreline. The control box may be plugged into a machine supply (one phase) and thus controlled by the machine emergency stop circuit. The table is driven by the pancake segmented motor via a gearbox and a toothed belt. In the the unlikely event that a belt change is required, the interior can be accessed by the removal of the base plate. The table bearings are ABEC7 Angular Contact. Recommended loading...

General Specification G Air bearing rotary table, allows large sizes and heavy loads to be rotated with minimal effort. G Heavyweight cast iron base for rigidity and stability. • Designed with recessed location points for clamping to existing machine T-slotted tables. G All mating faces are ground then scraped to a fine tolerance for accurate measuring and positioning. G Minimum size envelope, 1m diameter table just 230mm thick. G All units are based on the same shell. With various options, hydraulic clamping, encoder readout and full CNC automation, allowing later retrofitting if required. G...

ABRT Series Air Bearing Rotary Table Technical Detail Manual Operations Product Code Table Diameter Manual Indexing Optional Encoder Resolution Hydraulic Camping Force Motor Torque Peak Geometric Sizes and Tolerances Product Code Max Load Larger tables, higher loading and tighter tolerances can be accommodated on request. Jena Rotary Technology Limited Unit C2, Willow Drive, Sherwood Drive, Annesley, Nottingham NG15 0DP, United Kingdom. Tel: +44 (0) 1623 726010 Fax: +44 (0) 162