KÜHTREIBER, Ltd. is a Czech company, which is engaged in development, production and sale of welding equipment and accessories. The company was founded in 1998 and initially worked primarily in the domestic market, which has built up an extensive distribution and sales network. The gradual development of the company and expanding range led to an expansion into other European countries and then managed to get important business partners in other continents. CONTENT ABOUT COMPANY OVERVIEW OF FUNCTIONS Main objectives of the company, which is a satisfied customer, is achieved pursuit of maximum...

FUNCTIONS IN KÜHTREIBER MACHINES AAE Auto Arc Extinction – automatic arc extinction (see picture on page 4 – Start and finishing of welding process TIG LA). ANTI STICK Provides an automatic drop of the welding current at short circuit (sticking of the electrode). An electronic function ensuring the arc stability. BURN BACK Burning-out of the wire to the contact tip after finishing welding. Possibility of switching between two adjusted values of current – eligible for materials with different thickness. DOWN SLOPE Filling a crater at finishing welding. Dynamic power control – dynamic reduction...

SINGLE-PHASE PORTABLE UNDERVOLTAGE INVERTERS Welding method Protection – slow Welding current range Mains current/input 60 % Open circuit voltage FĒNIX 160 – 200 DESCRIPTION FĒNIX 160 – 200 are compact, portable low-voltage MMA and TIG welding machines. Design is based on inverter-microcontroller technology using a planar transformer. FĒNIX machines are designed with energy-saving inverter technology, high-level microprocessor by using planar transformer. Show excellent results either in normal operation or in use on generator and also on long extension cables. The ideal characteristic of arc...

SINGLE-PHASE INVERTERS KITin 1500 KITin 1700 KITin 1900 HF HF HF 50113 Protection – slow Welding current range Ingress Protection Cable panel socket Mains current/input 60 % Open circuit voltage Recommended type of torch Dimensions Weight FEATURES (Description on page 3) HOT START ARC FORCE ANTI STICK V.R.D. LIFT ARC TIG PULS FREQUENCY OF THE PULSATION DOWN SLOPE END CURRENT AAE CYCLE FOUR-STROKE Electromagnetic gas valve Strap belt for easy carrying OPTIONAL ACCESSORIES: Welding cables Plastic case for inverters and accessories Remote control Auto-darkening mask Electrodes Weldin

DESCRIPTION KITin 150 and 170 are inverter machines designed for industrial and professional use. They are constructed with the use of high-frequency technology with fast regulation of welding current. Machines are noted with high loading (125 A at 100%), performance, low electrical power consumption and excellent welding properties. They are lightweight, small size and mostly reliable. These machines are intended for operation, where the emphasis is on maximum value and high performance at a competitive price. All machines are equipped with a connector for connecting the remote control with...

Welding method THREE-PHASE DIGITAL PORTABLE INVERTERS Protection – slow Output current range Output voltage range Maximum current Peak welding current Output voltage Wire feeder speed Cable panel socket Dimensions Material of wire – Steel – Aluminium – Stainless steel Ingress Protection FEATURES (Description on page 3) SOFT START HOT START DOWN SLOPE UP SLOPE PULS PULS – BALANCE CYCLE TWO-STROKE / FOUR-STROKE LIFT ARC AN

DESCRIPTION Portable welding machines KITin 220 – 320 MMA / HF / MIG are designed as small, light and powerful digital threephase inverters. New generation digital controls ensure not only optimal settings of the welding characteristics, but their dynamic adaptation during the welding process as well. In this way there is achieved a substantially higher quality of weld joint and simplification of welding process. A significant benefit is achieved in new functions, which help to keep the welding arc in an optimal working characteristics. Due to this arc control technology excellent results may...

Protection – slow Welding current range Output voltage range Duty cycle Code – STANDARD ( ST ) – PROCESSOR ( PR ) THREE-PHASE WELDING MIG/MAG MACHINES Number of adjustment points only PROCESSOR only PROCESSOR only PROCESSOR Digital volt-ampere meter Wire feed SPOT PULS FEED BACK SOFT START Standard equip roll Wire feed speed Material of wire – Steel, Stainless steel – Aluminium – Cored wire Ingress Protection Dimensio

DESCRIPTION KIT 3000 – 3500 – 4100 are professional welding machines equipped with a high-powered transformer, robust wire feeder with an efficient motor, EURO connector and electronic control. The main advantages of machines KIT are excellent welding qualities, 10-grade, 20-grade or 40-grade voltage control, high power, high duty cycle, high reliability and easy operating. The machines are designed for plants with the highest levels of performance, reliability and simple control. OPTIONAL ACCESSORIES Welding torch, auto-darkening welding mask, pressure control valve, rolls and others on the...

COMPACT WELDING MIG/MAG MACHINES Code – STANDARD ( ST ) – PROCESSOR ( PR ) – SYNERGIC ( SY ) Protection – slow Welding current range Output voltage range Number of adjustment points only PROCESSOR Duty cycle Mains current/input 60 % Digital volt-ampere meter Wire feeder Standard equip roll Wire feeder speed Material of wire – Steel, Stainless steel – Aluminium – Cored wire Ingress Protection Dimensions Weight FEATURES (Description on page 3) 2-STROKE / 4-STROKE BURN BACK RESTORE PROGRAM EASY USE JOB MODE SPOT PULS FEED BACK SOFT START

PROCESSOR SYNERGIC DESCRIPTION KIT 305 – 405 are professional welding machines equipped with a high-powered transformer with copper primary and secondary winding, robust all-metal wire feeder with an efficient motor, an EURO connector and electronics control. The main advantages of machine KIT are excellent welding skills, 20-grade, or 40-grade voltage control, high power, high duty cycle, high reliability and very easy operating of versions PROCESSOR and SYNERGIC. In the case of Synergic machine there is, in addition, automatic adjustment of welding parameters and PROCESSOR STANDARD EQUIPMENT...