Uniq
21Pages

Edge Sander Sanding Ideas – Ideas that get the Job do

Edge Sander ADVANTAGES: ü 4 independent sanding stations ü Pivoting of main sanding unit up to 45° (patented) ü No table height adjustment necessary when pivoting the sanding unit ü The entire sanding unit oscillates with a stroke of up to 90mm / 3.5“ ü Sanding unit oscillation is precisely programmable ü Full utilisation of abrasive belt and graphite pad ü Precisely adjustable stock removal ü Highest possible sanding precision ü Heavy cast iron construction ü Most reliable edge-sander on the market ü Most versatile edge-sander on the market ü Easy and intuitive

Uniq Edge Sander

Edge Sander calibration and finishing of solid work pieces sanding of inner curves calibration and finishing of veneered work pieces sanding of outer curves sanding of angular edges

Edge Sander Uniq: „GENERAL SPECIFICATIONS“ ü Two extremely solid cast iron tables are provided on both sides of the sander. The entire sanding unit is pivoting (patented). The entire sanding unit is oscillating (patented). The sanding belt runs along two pulleys in order to reduce strain/wear on the graphite cloth Most easily adjustable centring device for sanding belt run Damper system for constant belt tension compensates belt length tolerances Abrasive belt dimension: 200 mm x 2000 mm (8“ x 79“). Abrasive belt speed: 15 m/s (45 ft/s). Main motor: 3,0 kW, 380 V / 50 Hz EUROPE (4 HP, 208...

The controls of the Uniq are intuitive and very precise. Emergency stop switch Start / confirmation button Oscillation programming Lever for belt tension Abrasive belt tracking control Edge Sander Uniq: „CONTROL DEVICES“ Gritz size compensation Lever and Scale for precise stock removal adjustm

Edge Sander MAIN SANDING UNIT: „PIVOTING OF THE UNIT“ ü The main sanding unit is a patented construction by KÜNDIG. No height adjustment of the working tables is required when pivoting the patented sanding unit . The angle of inclination of the sanding unit is adjustable by motor, ranging from 90° to 45°. It is displayed on a corresponding scale.

Edge Sander MAIN SANDING UNIT: „OSCILLATION“ The entire sanding unit is oscillating. Individually programmable oscillation stroke from 0 – 90 mm (0 – 3,5“). Full utilisation of abrasive belt and graphite cloth through programmable oscillation of the entire sanding unit. The oscillation is also fully active even when the main sanding unit is in a tilted position. The belt oscillation is driven by a separa

Edge Sander 1st. SANDING STATION: „VENEER-STATION“ This station is used for controlled and precise stock removal and works exactly like a jointer. Precise adjustment of the in-feed fence for precise and controlled stock removal. (Scale 1/10 mm / 0,004“). The in-feed fence is designed with ‚built-in‘ suction slots. Sanding platen/pad can be adjusted in order to compensate for abrasive grit. Zero-levelling feature of the in-feed fence & sanding platen/pad & out-feed fence. The entire sanding unit with the abrasive belt oscillates and the sanding belt runs over a graphite cloth with cooling...

Edge Sander 2nd. SANDING STATION: „WOOD-STATION“ This station is used to sand flat, angled or champfered edges as well as outer curves The entire sanding unit with the abrasive belt oscillates and the sanding belt runs over a graphite cloth with cooling properties. The "WOOD - STATION" - table is equipped with a bevelling fence with scale.

Edge Sander 3rd. SANDING STATION: „DRIVE-ROLLER-STATION“ The "DRIVE ROLLER - STATION" is an optionally available sanding station. This station is designed to sand different diameters of inner curves and roundings. For this feature, the machine must be equipped with the quickly mountable auxiliary „cast iron table H“. The auxiliary „cast iron table H“ is equipped with holes for dust extraction. Extraction outlet ∅ 150 mm (6"). The oscillating mandrel can be configured with sanding bobbins of different diameters: As it is an extension of the main sanding unit the large oscillation stroke of...

Edge Sander 4th. SANDING STATION: „FRONTAL-STATION“ The "FRONTAL - STATION" is an optionally available sanding station. This station is designed to sand bigger inner roundings of work-pieces against the rubberized belt driving roller of the main sanding unit. For this feature the machine must be equipped with the quickly mountable „half round table S“. The „half round table S“ is designed with small holes for dust extraction. It can be folded away when not used. Extraction outlet ∅ 150 mm (6"). The diameter of the abrasive belt drive roller is 90 mm (3,5"). As this is part of the main...

CAST IRON TABLE H HALF ROUND TABLE S GROOVES IN-FEED PLATEN Edge Sander ADDITIONAL MACHINE OPTIONS Optional: „cast iron table H“ Optional: „half round table S“ Optional: „grooved in-feed fence“ Necessary for „DRIVE ROLLER-STATION“. Grooves in the inlet fence for sanding work-pieces with an exc

© ADDITIONAL MACHINE OPTIONS ©Optional: „steplessbeltspeed“ Stepless abrasive belt speed for extremely sensitive surfaces or material with a low melting point. 3-15 m/s (9-45 ft/s). © Optional: „HARD sanding pad“ Sanding Pad insert „hard“ for sanding solid wooden and veneered edges. ©Optional: „CERAMICsanding pad“ Special CERAMICsandingpad insertfor heavy calibration tasks.

SUPPORT PRESSURE ROLLERS TABLE ENLARGEMENT Edge Sander ADDITIONAL MACHINE OPTIONS Optional: „auxiliary fence 45°“ Mountable at the in-feed fence, the „auxiliary in-feed stop 45°“ is for sanding phases of the edges of the workpiece with the main sanding unit in 45° position. Optional: „support pressure rollers“ A special device, which simpilfies the sanding of glazing bars, rails or similar work-pieces. Main unit in 90° position. Optional: „table enlargement“ Table enlargement with a steplessly to 900 mm (35,33") extendable solid front bar. With easy running guides and double support to the...