Uniq-S
23Pages

Edge Sander Sanding Ideas – Ideas that get the Job do

Edge Sander ADVANTAGES: ü 4 independent sanding stations ü Pivoting of main sanding unit up to 45° (patented) ü No table height adjustment necessary when pivoting the sanding unit ü The entire sanding unit oscillates with a stroke of up to 90mm / 3.5“ ü Sanding unit oscillation is precisely programmable ü Full utilisation of abrasive belt and graphite pad ü Integrated feeding system for long, narrow and very small work pieces ü Precisely adjustable stock removal ü Highest possible sanding precision ü Heavy cast iron construction ü Most reliable edge-sander on the market ü Most...

Uniq-S Edge Sander

Edge Sander calibration and finishing of solid work pieces sanding of inner curves calibration and finishing of veneered work pieces sanding of outer curves sanding of angular edges

Edge Sander Uniq-S: „GENERAL SPECIFICATIONS“ ü Two extremely solid cast iron tables are provided on both sides of the sander. Highly efficient feeding system with feed speed of 3– 15 m/min (9-45 ft/min). Feed motor 0.55 kW (0.75 HP) The entire sanding unit is pivoting (patented). The entire sanding unit is oscillating (patented). The sanding belt runs along two pulleys in order to reduce strain/wear on the graphite cloth Most easily adjustable centring device for sanding belt run Damper system for constant belt tension compensates belt length tolerances Abrasive belt dimension: 200 mm x...

The controls of the UNIQ-S are intuitive and very precise. Lever and Scale for precise stock removal adjustment. Emergency stop switch Grit size compensation Edge Sander Uniq-S : „CONTROL DEVICES“ Abrasive belt tracking control Lever for belt tension Oscillation programming Start / confirmation button Feed: Start / stop + Speed adjust

The main sanding unit is a patented construction by KÜNDIG. No height adjustment of the working tables is required when pivoting the patented sanding unit . The angle of inclination of the sanding unit is adjustable by motor, ranging from 90° to 45°. It is displayed on a corresponding scale. Edge Sander MAIN SANDING UNIT: „PIVOTING OF THE UNIT“

Edge Sander MAIN SANDING UNIT: „OSCILLATION“ ü The entire sanding unit is oscillating. Individually programmable oscillation stroke from 0 – 90 mm (0 – 3,5“). Full utilisation of abrasive belt and graphite pad by programmable oscillation of the entire sanding unit. The oscillation is also fully active when the main sanding unit is in a tilted position. The belt oscillation is driven by a separa

Edge Sander 1st. SANDING STATION: „VENEER-STATION“ This station is used for controlled and precise stock removal and works exactly like a jointer. The work pieces can either be processed manually or by using the highly efficient, integrated feeding system Precise adjustment of the in-feed fence for precise and controlled stock removal. (Scale 1/10 mm / 0,004“). The in-feed fence is designed with ‚built-in‘ suction slots. Sanding platen/pad can be adjusted in order to compensate for abrasive grit. Zero-levelling feature of the in-feed fence & sanding pad & out-feed fence. The entire sanding...

Edge Sander 1st. SANDING STATION: „VENEER-STATION with integrated FEEDING SYSTEM“ 2 special in-let stops help to feed even very long work-pieces. The feed speed is steplessly adjustable; 3 - 15 m/min (9 - 45 ft/m); Feed motor 0,55 kW (0.75 HP). The "VENEER - STATION" is equipped with a highly efficient feeding system which is machine frame integrated A 50 mm (2") wide transportation belt (2nd belt optionally available) and 20 mm (0,8") wide pressure rollers from top convey the work-pieces. A precise feeding even for very long and wide work-pieces is easy, fast and save. The top pressure...

Edge Sander 2nd. SANDING STATION: „WOOD-STATION“ This station is used to sand flat, angled or champfered edges as well as outer curves The entire sanding unit with the abrasive belt oscillates and the sanding belt runs over a graphite cloth with cooling properties. The "WOOD - STATION" - table is equipped with a bevelling fence with scale.

Edge Sander 3rd. SANDING STATION: „DRIVE-ROLLER-STATION“ ü The "DRIVE ROLLER - STATION" is an optionally available sanding station. This station is designed to sand different diameters of inner curves and roundings. For this feature, the machine must be equipped with the quickly mountable auxiliary „cast iron table H“. The auxiliary „cast iron table H“ is designed with holes for dust extraction. Extraction outlet ∅ 150 mm (6"). The oscillating mandrel can be configured with sanding bobbins of different diameters: As it is an extension of the main sanding unit the large oscillation stroke...

Edge Sander 4th. SANDING STATION: „FRONTAL-STATION“ The "FRONTAL - STATION" is an optionally available sanding station. This station is designed to sand bigger inner roundings of work-pieces against the rubberized belt driving roller of the main sanding unit. For this feature, the machine must be equipped with the quickly mountable „half round table S“. The „half round table S“ is designed with small holes for dust extraction. It can be folded away when not used. Extraction outlet ∅ 150 mm (6"). The diameter of the abrasive belt drive roller is 90 mm (3,5"). As this is part of the main...

CAST IRON TABLE H HALF ROUND TABLE S GROOVES IN-FEED PLATEN Edge Sander ADDITIONAL MACHINE OPTIONS Optional: „cast iron table H“ Optional: „half round table S“ Optional: „grooves in-feed fence“ Necessary for „DRIVE ROLLER-STATION“. Grooves in the inlet fence for sanding work-pieces with an exc

CD ADDITIONAL MACHINE OPTIONS (Doptional: „steplessbeltspeed“ Stepless abrasive belt speed for extremely sensitive surfaces or material with a low melting point. 3-15 m/s (9-45 ft/s). CD Optional: „HARD sanding pad“ Sanding Pad insert „hard“ for sanding solid wooden and veneered edges. (J)Optional: „CERAMIC sanding pad“ Special CERAMICsandingpad insertfor heavy calibration tasks.