Work Standard - FX
2Pages

Catalog excerpts

FiberXpert DDW-DLS(MS)-FX gravimetric General Information The FiberXpert Feeder is ideal for feeding long, irregularly cut and non-flowing ingredients. The feeder has the following main components: A scale, a stainless steel screw trough with a large inlet cross-selection, an inspection port for easy cleaning and maintenance, an screw trough agitator, a 3 phase agitator motor, a blade screw with 3 phase motor, a screw tube, a pulsation reducing rotating flow blade with motor at the outlet and a steep-wall extension hopper for ingredient storage. The FiberXpert is suitable for the feeding: Natural wood and carbon fibers, PP, PET and bottle flakes, shredded plastic or carpet fiber, cellulose, acrylic, aramid, PPS, polyamide, polymer or polyester fibers, film chips and shredded film strips from film edge trimming, fiber reinforcements or fillers for compounding and biopolymers. The gravimetric version includes the DLS weighing system featuring a highresolution digital load cell with serial data transmission or a MS, with strain gauge load cell with advanced filtering technology. The unit conforms to CE directives. Loss-in-weight feeder Load cell designation FiberXpert and Screw diameter (mm) Hopper volume and trough capacity (dm³) Control Modules Control and speed modules can be feeder mounted (Congrav® CM-E) or available for mounting in a separate control panel (Congrav® CB-E or Congrav® CB-S ). Controllers can communicate directly to most host/ PLC systems or to Brabender Technologie Congrav® Operator Interfaces. Technical Drawings and Dimensions Model sizes FX50-100 FX80-200 FX120-740 FX225-2000 Brabender Technologie GmbH & Co. KG, Kulturstr. 49, 47055 Duisburg, Tel.: +49(0)203 9984-0, email@brabender-technologie.com Changes reserved status: 2

Open the catalog to page 1

FiberXpert DDW-DLS(MS)-FX gravimetric Feed rate range Model sizes FX50-100 FX80-200 FX120-740 FX225-2000 * Theoretical rate to be confirmed by testing of minimum and maximum rates. Net weighing range/ max. bulk density Load cell DLS5 DLS6 MS5 MS6 91 kg / 0,05 kg/dm³ (200.6 lb / 0,05 kg/dm³) 219 kg / 0,11 kg/dm³ ( 482.8 lb kg / 0,11 kg/dm³) Technical Specification Ambient temperature: Humidity: max. vacuum/pressure: Product temperature: Screw trough, extension hopper, hopper lid: Screws, screw tubes, outlets: Non-contact components: Extension hopper Screw drive: Agitator drive: Propellor...

Open the catalog to page 2

Work Standard - FX 2Pages

Catalog excerpts

All Kubota Brabender Technologie GmbH catalogs and technical brochures

Work Standard - FX
2Pages