Liquid Feeder FDDW S-Type gravimetric General Information The FDDW S-Type with its simple design is suitable for feeding liquid products. The feeder has the following main components: a piston diaphragm (DKMP) or gear pump (DZB) a three-phase drive and a hopper available in sizes of 6 liters or 50 liters. The feeding pump conveys the liquid product from the hopper to the outlet for further processing. The gravimetric version is available with the analog MS weighing system with strain gauge load cell. The unit conforms to CE directives. Model Specification Drive power Control Modules Control and speed modules are offered either mounted onto the feeder (Congrav® CM-E) or are available for mounting in a separate control panel (Congrav® CB-E or Congrav® CB-S). Controls can communicate directly to most host/ PLC systems or to Brabender Technologie Congrav® Operator Interfaces. Technical Drawings and Dimensions volumetric feeders Hopper 6L Hopper 50L Brabender Technologie GmbH & Co. KG, Kulturstr. 49, 47055 Duisburg, Tel.: +49(0)203 9984-0, [email protected] gravimetric feeders Control module CB FDDW-MS2-DKMP-6-S FFDW-MS5-DKMP-50-S Changes reserved Stand: 2022

Liquid Feeder FDDW S-Type gravimetric Technical Specification Ambient temperature: Pressure range: Ingredient temperature: Perrmitted density: Pump, Hopper, Hopper lid: Non-contact components: 1.4301, Aluminium, plated or painted steel (RAL 7035) Hopper 6 dm³ (0.2 cuft), 50 dm³ (1.8 cuft) Hopper lid for automatic refilling Feeding capacity: 2-45 dm³/h (0.2-1.6 cuft/h) at 6-S, 5-400 dm³/h (0.2-14.1 cuft/h) at 50-S 1-400 mPas (DKMP) ; 400-5000 mPas (DZP) AC 230/400 V (110VAC/460VAC)- 50Hz** or 266/460 V (230/460VAC) - 60Hz, 24VDC (control voltage) Power supply: Net weighing range MS : 6,6Kg (14.6...