Vibrating Tray Feeder DDW-M-DVT120 Volumetric and Gravimetric General Information The DVT120 is an ideal feeder for granules and free flowing bulk materials. The feeder has the following main components: A freestanding integrated scale with high resolution strain gauge or digital load cell, a support frame with integrated hopper with the volumes of 90 dm³ (3.18 cuft) or 150 dm³ (5.3 cuft) and a vibrating tray mounted in the frame with electromagnetic vibrating drive. The tray design provides uniform feed for fragile ingredients due to its vibrating principle of operation which gently discharge material. The electromagnetic vibrating drive features amplitude feedback, ensuring linear feed rate over the entire range. All modules are fully mounted and internally wired on terminal boxes. The DVT120 can be supplied with integrated control modules. The gravimetric version includes the MS6 weighing systeem with strain gauge load cell as well as the digital load System DLS6 and MD6 (for extremely high measurement requirements), featuring a high-resolution digital load cell with serial data transmission with strain gauge load cell with advanced filtering technology. The unit conforms to CE directives. Loss-in-weight feeder Weighing system Vibrating tray and width (mm) Control module Feeding principle Drive Vibrating Tray Electromagnetic vibrating drive Adjustment range Enclosure protection Width of vibrating tray Mains voltage Control modules Control and speed modules are offered either mounted onto the feeder (Congrav® CM-E) or are available for mounting in a separate control panel (Congrav® CB-E or Congrav® CB-S ). Controls can communicate directly to most host/ PLC systems or to Brabender Technologie Congrav® Operator Interfaces. Brabender Technologie GmbH & Co. KG, Kulturstr. 49, 47055 Duisburg, Tel.: +49(0)203 9984-0, [email protected] Changes reserved status: 202

Vibrating Tray Feeder DDW-M-DVT120 Volumetric and Gravimetric Technical Drawings and Dimensions Volumetric feeder DVT120 - 90 dm³ DVT120 - 150 dm³ Gravimetric Feeder Control module CB Control module CM DDW-MD(S)6-DVT120-90 DDW-MD(S)6-DVT120-90 CM DDW-MD(S)6-DVT120-150 DDW-MD(S)6-DVT120-150 CM Technical Specification Ambient temperature: Humidity of the air: max. vacuum/pressure: Ingredient temperature: max. feed rate min. feed rate max. bulk density Trough, outlet, hopper, hopper lid: Non-contact components: 90 dm³ (3.18 cuft) hopper or 150 dm³ (5.3 cuft) hopper: Vibrating drive Power supply...