DDW-M-DS60-E
2Pages

Catalog excerpts

Granule screw DDW-M-DS60 Gravimetric General Information The DS60 screw feeder is capable of reliably metering granules as well as free-flowing and fine-grained bulk ingredients at medium feed rates. There are two feeder types, the type S for standard, or type E for enhanced. The type S has the following components: screw drive assembly, 50 litre extension hopper, hopper lid, 3 phase drive unit connected to the screw tube by quick release clamps and feed screw. Cleaning and screw change for the type S is done by opening the latch and pulling the screw out with the drive assembly. The type E has the same components as the type S but includes a valve for complete ingredient discharge and a sliding guide to allow the screw drive assembly to be disconnected from the screw and moved to one side allowing full screw removal from the rear. These components are mounted on a robust high-resolution MS5 weighing system that features serial communication and advanced filtering technology. The unit conforms to CE directives. Model Specifications Screw drive Drive power Screw speed Screw speed optional Agitator in screw trough Agitator drive Drive power Control Modules Control and speed modules are offered either mounted onto the feeder (Congrav® CM) or are available for mounting in a separate control panel (Congrav® CB). Controls can communicate directly to most host/ PLC systems or to Brabender Technologie Congrav® Operator Interfaces. Technical Drawings and Dimensions gravimetric feeders Control module CB S-type (standard) E-type (enhanced) Brabender Technologie GmbH & Co. KG, Kulturstr. 49, 47055 Duisburg, Tel.: +49(0)203 9984-0, email@brabender-technologie.com changes reserved status: 2019-10

Open the catalog to page 1

Granule screw DDW-M-DS60 Gravimetric Available Screw Sizes and Feed Rates • Flexible inlet and vent connection • Vertical outlet with flexible connection • Horizontal outlet with flexible connection • Interchangeable screws • Maintenance disconnect box, electrical quick disconnect • Versions for higher or lower temperatures • Cleaning and refill systems upon request changes reserved status: 2019-10 Brabender Technologie GmbH & Co. KG, Kulturstr. 49, 47055 Duisburg, Tel.: +49(0)203 9984-0, email@brabender-technologie.com

Open the catalog to page 2

DDW-M-DS60-E 2Pages

Catalog excerpts

All Kubota Brabender Technologie GmbH catalogs and technical brochures

DDW-M-DS60-E
2Pages