World Best Efficiency TB series are world’s only and most advanced single stage centrifugal blowers based on high speed focused specialized technology. Concurrently designed impeller, motor, bearing and VFD are the key of our high efficiency. Due to it’s high rotational speed requirements, all components should have been redesigned considering high speed and high temperature conditions. Bearing life time, rotor stability, motor heat generation and cooling, new high speed VFD development, reliable high speed surge protection, high rise-to-surge feature; all those were new challenge in order to overcome high speed difficulties. Now, TB series are the world’s only blower which satisfies all technical requirements and efficiency. Stator 2 Pole permanent magnet Shaft Thrust disk & Thrust bearing Radial airfoil bearing Oilless Operation Thanks to air foil bearings, ISO 8573-1 class 0 is over satisfied. Flow Meter Installed Bell mouth flow meter is installed and shows instantaneous flow rate with ±0.5% tolerance Real High Rise-to-Surge The most advanced current based control method enables an active high rise-to-surge advantage. This is a critical feature required by pneumatic conveying and MBR applications. Compactness TB series are world’s most compact blower products reducing construction costs and space requirements. Semi-Permanent Life TB series can be used permanently with proper maintenance without performance degradation. Stainless steel impellers and packaging insure durability and allow for permanent life. This catalog is made from recycled paper

TB : Turbo Blower S : Standard E : ECO TC : standard 7bar turbo compressor TCL : Low pressure turbo compressor V : Variable Diffuser F : Fixed Diffuser Design Pressure (bar) Field Performance Test 1. Test condition calculation 2. Runing on the test condition (volume flow rate, discharge pressure) - Flow rate is measured by intake bell mouth or other type of flowmeter. - Discharge static pressure is measured after diffusing cone. - Total kW is measured at the package inlet electric input after the harmonic filter. - Ambient temperature and pressure is measured by sensors specially tuned for ambient...

Package Layout Standard Maximum efficiency mode All heat from VFD and motor is mixed with intake air, and increases inlet temperature of the impeller. (usually ~ 7 degrees C). If scroll and pipe is not insulated, the inlet temperature increases more (over 10c). This increased inlet temperature lowers the compression efficiency 3-4%. Package Dimensions Package Footprint (L×W×H) Suction Flange Main Discharge Flange Filter Amount KTURBO INC. Headquarter (Factory, R&D and C/S center) 631, Bugang Buyoung cheongwon Chungbuk, 363-941, KOREA / TEL: +82-43- 275-7573 / FAX: 630-406-1538 / E-mail: [email protected]...