SPECIAL TOOLS FOR PASSENGER CARS & LIGHT COMMERCIAL VEHICLES

BODYWORK AND INTERIOR ENGINE - ENGINE COOLING SYSTEM ENGINE - HOSE CLAMP PLIERS ENGINE - FUEL SYSTEM ENGINE - CYLINDER HEAD / ENGINE BLOCK ENGINE - TURBOCHARGER ENGINE - FUEL INJECTION SYSTEM ENGINE - SPARK PLUGS ENGINE - GLOW PLUGS ENGINE - AUXILIARY DRIVE BELT / ALTERNATOR ENGINE TIMING TOOLS EXHAUST SYSTEM / CATALYSERS AIR CONDITIONING BATTERY SERVICE ELECTRICAL / ELECTRONIC TOOLS HYBRID / HIGH-VOLTAGE TOOLS GEARBOX CLUTCH SPRINGS / SHOCK ABSORBERS STEERING AND AXLE AUTO GLASS BRAKE SERVICE OIL SERVICE WHEEL / TYRE FITTING GENERAL WORKSHOP REQUIREMENTS

VEHICLE LIGHTING AND BUMPERS T-handle Torx key wrench, long • Extra long execution • Two component handle • Continuous hardened • Matt chrome • Special tool steel • Suitable for the adjustment of the headlights and for the bonnet and headlight gap adjustment • Extra long execution • With T-handle • With hanging hole • Continuous hardened • Multi-tooth head with centring pin, bronzed • Chrome plated • Chrome vanadium • 6 point • For actuating the bumper screw at the rear • Internal square • Extra-long design for actuating the screw via the threaded rod • Allows controlled tightening of the screw...

Torx and hexagon socket screw extractor set • Ideal for loosening and opening screws and bolts whose head is damaged or worn off • Special left-hand cutting thread with tapered cutting edges for Torx screws and specially shaped extractors for hexagon socket screws • Including TORSIONpower bits for Torx and hexagon socket screws • Bits with torsion zone for cushioning of the torque peak • Includes magnetic quick release bit holder and 1/2” socket adapter • Colour-coded bits • For manual operation • Longer service life • Nickel plated • Special tool steel • In durable plastic case ©© ___a 150.7060...

Repair staples Plastic soldering iron consists of: • Suitable for assembly and removal of parking sensors, which are integrated into the front and rear bumpers • Allows professional tightening to the prescribed torque • Internal square drive to DIN 3121 / ISO 1174 • High accuracy of fit • For manual operation • Matt finish • Chrome vanadium Application range: Mercedes S Class (W140) and E Class (W210)

Drill for PDC punches 0 10 mmPunch set with pin, 0 18.2 mmPunch set with pin, 0 26.0 mm • Ideal for drilling the holes into the bumper for punches • Right hand cutting • High performance steel • Ideal for punching holes into the bumper for parking sensors • Allows the optimum diameter for parking sensors • No damage to the paint when cutting out the holes • Repainting is not necessary • Parking sensors must be inserted to the exact millimetre due to their sensitivity • Includes mandrels with which the parking sensors can be attached precisely to the bumper • Ideal for punching holes into the...

Punch set with pin, 0 28.1 mm Punch set 0 29.3 mm Hole punch set for parking sensors (PDC) • Ideal for punching holes into the bumper for parking sensors • Allows the optimum diameter for parking sensors • No damage to the paint when cutting out the holes • Repainting is not necessary • Parking sensors must be inserted to the exact millimetre due to their sensitivity • Includes mandrels with which the parking sensors can be attached precisely to the bumper recommended accessories: drill 140.2554 and locking handle 140.2542 • Ideal for punching holes into the bumper for parking sensors • Allows...

Knob with ball bearing • ideal fro driving the punches for the PDC and PLA sensors • guarantees optimal centring • ball-bearing • No damage to the paint when cutting out the holes • Repainting is not necessary • two different diameters: 4x 38 mm / 4x 60 mm • only suitable for Ford punches • Ideal for punching holes into the bumper for parking sensors • allows an exact fit for the parking sensors • in combination with the optimal paint protection 140.2577 damage is avoided • Repainting is not necessary • Parking sensors must be inserted to the exact millimetre due to their sensitivity Application...

Punch set type 09 • Ideal for punching holes into the bumper for parking sensors • allows an exact fit for the parking sensors • in combination with the optimal paint protection 140.2577 damage is avoided • Repainting is not necessary • Parking sensors must be inserted to the exact millimetre due to their sensitivity Application range: Ford Mondeo 02/2007 (Model no.: 20075) recommended accessories: Drill 140.2576 and T-handle • Ideal for punching holes into the bumper for parking sensors • allows an exact fit for the parking sensors • in combination with the optimal paint protection 140.2577...

Torx E socket, deep • For the assembly and disassembly of door hinges • Ideally suitable for door alignment • Extra short bits with ball locking • Includes ratchet with bit adaptor • In durable plastic storage case • Torx E • Ideal for the assembly and disassembly of the deep-seated door hinge holding screws on the rear hinged door and sliding door • For loosening and tightening Torx-E cylinder head screws • Internal square drive to DIN 3120 / ISO 1174 with ball reception • Long execution • For manual operation • Matt finish • Chrome vanadium • with special profile • for loosening the locking...

Door hinge alignment tool • Ideally suited for adjustment of welded door hinges • The adjustment mechanism allows a zero clearance • Directing the hinge is possible in all directions • No removal necessary • Special tool steel • Universal usage for positioning, fixing and separating body parts • Ideal for the damage-free opening of vehicle doors • Levelling tool for the installation of door and window frames • For separating interior trim • Pumping via a hand pump with valve connector • Release valve on the bellows • Extremely high pressure power ERGOTORQUEp/us® screwdriver for Torx screws, tamperproof...