Balancing and Shut-off Valve Type Series Booklet

Legal information/Copyright Type Series Booklet BOA-Control/ BOA‑Control IMS All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or processed for any other purpose, nor otherwise transmitted, published or made available to a third party without the manufacturer's express written consent. Subject to technical modification without prior notice. © KSB SE & Co. KGaA, Frankenthal 18/01/201

Control Valves / Measurement Valves Balancing and Shut-off Valves to DIN/EN Main applications ■ Hot-water heating systems ■ Air-conditioning systems ■ Cooling circuits ■ BOA-Control IMS complete with sensors for measuring flow rate and temperature ■ BOA-Control prepared for attaching sensors for measuring flow rate and temperature ■ Straight-way globe valve with slanted seat ■ Non-rotating stem with protected, external thread ■ Non-rising handwheel ■ Locking device, travel stop, position indicator, throttling plug and insulating cap with anti-condensation feature as standard ■ Compact EPDM-encapsulated...

Control Valves / Measurement Valves Balancing and Shut-off Valves to DIN/EN

Control Valves / Measurement Valves Balancing and Shut-off Valves to DIN/EN BOA-Control/BOA-Control IMS, type BOA-CL, DN 15-200 Parts list

Control Valves / Measurement Valves Balancing and Shut-off Valves to DIN/EN BOA-Control IMS, type BOA-H, DN 250-350 Parts list

Control Valves / Measurement Valves Balancing and Shut-off Valves to DIN/EN

Control Valves / Measurement Valves Balancing and Shut-off Valves to DIN/EN Mating dimensions as per standard Face-to-face lengths: Flanges: Flange facing: DIN EN 558/1, ISO 5752/1 DIN EN 1092-2, flange type 21 DIN EN 1092-2, type B

Control Valves / Measurement ValvesBalancing and Shut-off Valves to DIN/ENInstallation instructions a Non-compliance with the following installation instructions may result in failure of the measuring functions! For measuring purposes, the flow direction through BOAControl/ BOA-Control IMS balancing and shut-off valves of the BOA-CL series (DN 15-200) must correspond to the direction indicated by the arrow cast on the valve body. An alternating direction of flow is permissible for shut-off duty. Flow through valve type BOA-H (DN 250-350) must be in the direction indicated by the arrow cast on...

Control Valves / Measurement ValvesBalancing and Shut-off Valves to DIN/ENTechnical data of BOATRONIC MS, BOATRONIC MS-420 Technical data of BOATRONIC MS, BOATRONIC MS-420 4) Applies to BOA-Control IMS with H2O at 20 °C, v > 0.5 m/s with manual zero point calibration

Control Valves / Measurement Valves Balancing and Shut-off Valves to DIN/EN Configuration and function For flow rate and temperature measurement BOATRONIC must be connected to a BOA-Control or BOA-Control IMS balancing and shut-off valve. BOATRONIC is operated via a 3-key membrane keypad. A multi-line LCD display and multicolour LED provide the user with the requisite information. Display/indicator elements and operating elements

Control Valves / Measurement Valves Balancing and Shut-off Valves to DIN/EN Characteristic curves of BOATRONIC MS-420 Correlation between volume flow rate and output signal for BOATRONIC MS-420 DN 15 to 50 40 DN 50

Control Valves / Measurement Valves Balancing and Shut-off Valves to DIN/EN

Control Valves / Measurement Valves Balancing and Shut-off Valves to DIN/EN Chemical resistance chart The information provided in this chemical resistance chart is based on experience, the Dechema lists as well as manufacturer information. Corrosion resistance is largely dependent on the operating conditions, temperatures and concentrations. Hydroabrasive wear in fluids containing solids is not covered in this list. All information provided herein, therefore, only serves as an orientation. Warranty claims may not be asserted on the basis of this list! Chemical resistance chart for refrigerants...

KSB SE & Co. KGaA Johann-Klein-StraBe 9 • 67227 Frankenthal (Germany) Tel. +49 6233 86-0 www.ksb.com