Catalogs >
KSB >
Ama-Drainer 80/100

Ama-Drainer 80/100
20Pages

Catalog excerpts

Submersible Waste Water Pump Type Series Booklet

Legal information/Copyright Type Series Booklet Ama-Drainer 80/100 All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or processed for any other purpose, nor otherwise transmitted, published or made available to a third party without the manufacturer's express written consent. Subject to technical modification without prior notice. © KSB SE & Co. KGaA, Frankenthal 12/09/2018

Open the catalog to page 2

Building Services: Drainage Drainage Pumps / Waste Water Pumps Operating data Operating properties Building Services: Drainage Drainage Pumps / Waste Water Pumps Ama-Drainer 80/100 Main applications ■ Drainage ■ Disposal ■ Drainage systems ■ Lowering groundwater levels ■ Maintaining groundwater levels ■ Draining of pits, shafts, etc. ■ Building site drainage ■ Construction pit drainage ■ Emergency pump in the event of flooding Fluids handled Standard design ■ Slightly contaminated water ■ Solid particles with a particle size of up to 12 mm Variant B/BH ■ Water containing sand Design details...

Open the catalog to page 4

Building Services: Drainage Drainage Pumps / Waste Water Pumps Shaft seal ■ Pump end: 1 mechanical seal ■ Drive end: 1 mechanical seal ■ Liquid reservoir between the seals for cooling and lubrication Impeller type ■ Open multi-vane impeller Bearings ■ Maintenance-free ■ Grease-packed rolling element bearings sealed for life Electrical connection Ama-Drainer (B/BH) 80 for DOL starting: ■ Ama-Drainer pump sets for 3~400 V are supplied ready to be plugged in as standard. The scope of supply includes a power cable, CEE plug, phase inverter, phase sequence indicator, equipment-on lamp, fault...

Open the catalog to page 5

Building Services: Drainage Drainage Pumps / Waste Water Pumps Overview of product features / selection tables Table of fluids handled The table of fluids handled is a selection aid for different applications. It serves as guidance and is based on long-standing experience. The data are reference values and are not to be considered generally binding recommendations. They shall not be the basis for warranty claims. Please contact your nearest sales branch for in-depth advice. Table of fluids handled X = standard For improved fire protection in building services. Variant: power supply cables...

Open the catalog to page 6

Building Services: Drainage Drainage Pumps / Waste Water Pumps Technical data Free passage Material variants Standard/B/BH Special connection elbow see pump accessories

Open the catalog to page 7

Building Services: Drainage Drainage Pumps / Waste Water Pumps Characteristic curves Ama-Drainer 80/100; n = 2800 rpm, multi-vane impeller 0 28 Fig. 1: Free passage: Ama-Drainer 80/100 = 12 mm Performance tolerance to ISO 2548 Class C (water under standard conditions)

Open the catalog to page 8

Building Services: Drainage Drainage Pumps / Waste Water Pumps

Open the catalog to page 9

Building Services: Drainage Drainage Pumps / Waste Water Pumps Installation example of a dual-pump station 80/100 ND

Open the catalog to page 10

Building Services: Drainage Drainage Pumps / Waste Water Pumps AccessoriesPump accessories

Open the catalog to page 11

Building Services: Drainage Drainage Pumps / Waste Water Pumps Control units / switchgear Item Description Motor protection switchgear MSD Float switch Dimensions (H × W × D): E10 E12 100 × 170 × 112 mm LevelControl Basic 2 control unit for singlepump station Required in addition: 1 float switch or 4...20 mA sensor, optionally with master switch DOL starting, with manual-0-automatic selector switch, indicator lamps and control panel, high water alert, integrated alarm buzzer 85 dB(A), optional mains-independent alarm via rechargeable battery, operating hours counter / start-stop cycles per...

Open the catalog to page 12

Building Services: Drainage Drainage Pumps / Waste Water Pumps Connection to the control station With the exception of MSD, each control unit / switchgear features a volt-free contact for transmitting the general fault message to the control station. Optional components are not EDI-compatible (configurable range). LevelControl Basic 2 control units Symbols key Symbol Optional Control unit feature Not a control unit feature Comparison of functions of single-pump stations and dual-pump stations Feature 400 V: 6-10 A 400 V: 13-18 A Functions Draining Filling via float switch(es) Stand-by pump:...

Open the catalog to page 13

Building Services: Drainage Drainage Pumps / Waste Water Pumps

Open the catalog to page 14

Building Services: Drainage Drainage Pumps / Waste Water Pumps Alarm switchgears for pumps without ATEX AS 0/AS 1/AS 2/AS 4/AS 5 Item Plastic housing, IP20, H × W × D = 140 × 80 × 57 [mm]. Use float switch, F1 leakage sensor (item E64), M1 alarm contactor or signal relay of control unit as contactor. Alarm switchgearAS 2 29128422 with circuit breaker, acoustic signal transmitter with 85 dB(A), green equipment-on lamp With circuit breaker, acoustic signal transmitter with 85 dB(A), green equipment-on lamp, volt-free contact for hook-up to a control station Plastic housing, IP20, H × W × D =...

Open the catalog to page 15

Building Services: Drainage Drainage Pumps / Waste Water Pumps Control unit / switchgear accessories Overview of control units 4) Not suitable for LevelControl Basic 2.

Open the catalog to page 16

Building Services: Drainage Drainage Pumps / Waste Water Pumps Exploded view and list of components 550.21 932.32 550.1 Fig. 2: Exploded view List of components Part No. Volute casing Casing insert Inlet ring Suction cover Pump foot Impeller Impeller hub cap Deep groove ball bearing Bearing cover Gasket Profile seal End connector CEE motor protection plug Terminal box cover Terminal clamp Float switch Plug-in sleeve Flat connector Coupling connector Pressure screw Motor housing Stator core pack

Open the catalog to page 17