Ama-Porter S
24Pages

{{requestButtons}}

Catalog excerpts

Ama-Porter S - 1

Type series booklet 2541.51/08-EN Ama-Porter S Submersible motor pumps Fields of Application Pumping of waste water containing solid matter or domestic sewage such as waste from toilets, washing machines, dishwashers, in intermittent operation, etc. Surface water or rain water pumping in intermittent operation such as car park drainage. Drainage of sumps liable to flooding. Operating characteristics Q : up to 17 m3/h, (4,7 l/s). H : up to 21 m. Motor Power ; 1.5 kW maximum for three phase motor. 1.1 kW maximum for single phase motor. Operating temperature up to 40°C. Intermittently 70°C (3 to 5 min.). Materials Casing : EN.GJL-200 / JL 1030 / FGL 200 / GG 20. Shaft : Chrome steel 1.4021 /X20 Cr13/Z20 C13. Cutter system in very hard wear resistant material. Shaft seal : (Motor side) Lip seal Shaft seal : (Pump side) Mechanical seal Silicon/Silicon Nuts & bolts : Stainless steel Elastomers : Nitrile rubber Float switch : Polypropylene Pump type Vertical single casing submersible motor pump. Shaft seal Twin shaft seal with intermediate oil chamber. Motor side : Single lip seal Pump side : Single mechanical seal independent Type of pump : S = cutter: B = with start box Discharge diameter DN 50 = series 5 _ . Size : SE = Single-phase with float switch NE = Single-phase without float switch ND = Three-phase without float switch Motor Single phase : 230 V - 50 Hz with built in thermal overload protection Three phase : 400 V - 50 Hz direct on-line starting Motor protection : IP68, Class F insulation in accordance with EN 60529/IEC 529. Please note : Variable-speed operation of this pump is not allowed. Operating mode S1 - submerged (max. 5 m) Operating mode S3 - not submerged (see dimension table) Bearings Sealed for life radial ball bearings. £ £ Suitable for installation in accordance with standard EN 12050-1 The pump must not be used in countries where pumps handling sewage with faeces are subject to explosion protection regulations.

Open the catalog to page 1
Ama-Porter S - 2

Scope of Supply Pump complete ready for installation with either stationary or transportable mounting kits. The SE versions are fitted with an integral float switch. The single-phases versions are equipped with a start box with built-in capacitors. Tight housing, IP 56, of insulating material. The box is provided with 2 cable glands and a power supply cable with plug. Dimension: 190 mm x 140 mm x 70 mm Details - Manufactured in cast iron construction EN.GJL-200 / JL 1030 / FGL 200 / GG 20. - Non -flameproof motor. - Unique resin imbedded, plug connection. - Single phase version are...

Open the catalog to page 2
Ama-Porter S - 3

Ama-Porter S Advantages offered by the Ama-Porter S pump. Resin impregnated cable connection plug. Singular casing submersible motor with Class F insulation designed for optimum performance. Your benefit: Absolutely water tight cable entry. Your benefit: Optimum motor design for safe operating conditions. Side cable entry position ensures the cable is protected against damage. Single phase version protected against thermal overload by integral winding protection. Your benefit: Motor is protected, even in automatic operation conditions. Three phase version, oversized motor ensuring good...

Open the catalog to page 3
Ama-Porter S - 4

Ama-Porter S Ama-Porter SB 545 SE/NE 2900 1/min Forderhohe Head Hauteur Prevalenza Altura manometrica Laufradform Impeller type Forme de roue Tipo girante Tipo de rodete freier Durchgang free passage section de passage passaggio libero paso libre Kennlinien nach DIN 1944/III. Sie entspre-chen der effektiven Motordrehzahl. Curves as per DIN 1944/III. They correspond to the effective motor speed. Courbes selon DIN 1944/III. Elles correspondent a la vitesse de moteur effective. Curve secondo DIN 1944/ML Correspon-denti agli effettivi giri del motore. Curvas segun DIN 1944/III. Se refieren a la...

Open the catalog to page 4
Ama-Porter S - 5

Ama-Porter S Ama-Porter S 545 ND 2900 1/min Forderhohe Head Hauteur Prevalenza Altura manometrica Kennlinien nach DIN 1944/III. Sie entsprechen der effektiven Motordrehzahl. Curves as per DIN 1944/III. They correspond to the effective motor speed. Courbes selon DIN 1944/III. Elles correspondent a la vitesse de moteur effective. Curve secondo DIN 1944/ML Correspondenti agli effettivi giri del motore. Curvas segun DIN 1944/ML Se refieren a la velocidad efectiva del motor. The diagrams refer to the effective speed of the motor. Density=1, viscosity=1 cSt. Ama-Porter SB 545 SE/NE - S 545 ND...

Open the catalog to page 5
Ama-Porter S - 6

Ama-Porter S Encombrements Ama-Porter SB 545 SE/NE - S 545 ND Vertical flange discharge DN 50/50 Stationary version with guide wire lifting system Stationary version with guide hoop Guide hoop (1) Lowest switch off level Ama-Porter SB 545 SE/NE - S 545 ND Vertical flange discharge DN 50/50 Stationary version with guide rail lifting system 1 rail Pipe Ø 33.7 x 2 Flange of duckfoot bend ((1) Lowest switch off le

Open the catalog to page 6
Ama-Porter S - 7

Ama-Porter S Encombrements Ama-Porter SB 545 SE/NE - S 545 ND Vertical flange discharge DN 50/50 Stationary version with guide rail lifting system -- 2 rails (1) Lowest switch off level Flange of duckfoot bend Ama-Porter SB 545 SE/NE - S 545 ND Horizontal pedestal installation G 2” Stationary version with guide wire lifting system Stationary version with guide hoop Guide hoop (1) Lowest switch off level

Open the catalog to page 7
Ama-Porter S - 9

Ama-Porter S Installation Kits for Stationary Installation Item Illustration P2+P5 (guide hoop arrangement) Installation parts for Installation depth : 1.5 m stationary wet installation 1.8 m consisting of: duckfoot bend 2.1 m DN 50 guide hoop, bolts, anchor bolts, clamps with stainless steel bolts Now without chain Installation parts for Installation depth : 1.5 m stationary wet installation 1.8 m consisting of: duckfoot bend 2.1 m DN 50 / 2” guide hoop, bolts, anchor bolts, clamps with stainless steel bolts Now without chain P2+P5 (guide hoop arrangement) P4 + P5 (guide wire arrangement)...

Open the catalog to page 9
Ama-Porter S - 10

Installation kit for twin guide rail arrangement Item Illustration Weight net approx. kg/unit Installation parts for stationary wet-well installation, consisting of: duckfoot bend, mounting bracket, stainless steel bolts, adapter, anchor bolts Now without chain P5 (twin guide rails) Mounting bracket x2 fl-* §■•!■=. Mounting bracket, cpl., consisting of: Mounting bracket, stainless steel bolts, adapter, anchor bolts 1,6 Claw JL1040 with stainless steel bolts Installation Kit for Transportable Versions Item Illustration Description Item Illustration Description Chain for Stationary...

Open the catalog to page 10

All KSB S.A.S. - France catalogs and technical brochures

  1. ACTAIR

    8 Pages

  2. BOA-R

    16 Pages

  3. Amaline

    2 Pages

  4. ISORIA

    2 Pages

  5. AMTROBOX

    12 Pages

  6. Ama-Porter

    36 Pages

  7. AKR/AKRS

    12 Pages

  8. AKG-A/AKGS-A

    16 Pages

  9. ACTAIR NG

    28 Pages

  10. ACTELEC

    22 Pages

  11. Amacan S

    2 Pages

  12. Amacan P

    2 Pages

  13. Amamix

    2 Pages

  14. Amaprop

    2 Pages

  15. Hya-Rain

    2 Pages

  16. CHTR

    8 Pages

  17. Vitalobe ®

    2 Pages

  18. SISTO

    2 Pages

  19. GZ

    2 Pages

  20. CHTC

    2 Pages

  21. NQ

    2 Pages

  22. Amacan K

    2 Pages

  23. AmaDS³

    2 Pages

  24. SET 100

    2 Pages

Archived catalogs

  1. Ama-Porter

    36 Pages