Catalog excerpts
Gate Valve Type Series Booklet
Open the catalog to page 1Legal information/Copyright Type Series Booklet AKG-A/AKGS-A All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or processed for any other purpose, nor otherwise transmitted, published or made available to a third party without the manufacturer's express written consent. Subject to technical modification without prior notice. © KSB SE & Co. KGaA, Frankenthal 04/10/2019
Open the catalog to page 2Gate Valves Gate Valves to DIN/EN in Pressure Seal Design Gate Valves Gate Valves to DIN/EN in Pressure Seal Design AKG-A/AKGS-AValve body materials Material Overview of available materials Main applications ■ Fossil-fuelled power stations ■ Process engineering ■ Boiler feed applications ■ Boiler recirculation ■ Chemical industry ■ Petrochemical industry ■ Sugar industry ■ Mining ■ Descaling units ■ Pulp and paper industry ■ Shipbuilding ■ Snow-making systems ■ Nuclear power stations Design details Design ■ Pressure seal design ■ Non-rotating stem ■ Split wedge ■ Yoke head suitable for...
Open the catalog to page 4Gate Valves Gate Valves to DIN/EN in Pressure Seal Design Product benefits ■ Additional features ensure safe sealing to atmosphere: - Pressure seal bonnet. Low risk of leakage, particularly at high pressures and temperatures. - Graphite gland packing with packing end rings. ■ Reliable, tight shut-off and service-friendly design - Wedge holder with flexibly mounted split wedge. Precise alignment of wedge discs with body; wedge discs are easy to replace. - Actuating moments are absorbed by the wedge holder guided in the body. No additional loads on the wedge discs and the seat/disc interface....
Open the catalog to page 5Gate Valves Gate Valves to DIN/EN in Pressure Seal Design Pressure/temperature ratings Flanged (AKG-A) or machined butt weld ends (AKGS-A) Permissible operating pressures [bar]1* (to EN 1092-1)2* 1) The valves are suitable for temperatures down to -10 °C. 2) Operating pressures in accordance with DIN 2401 are also permissible.
Open the catalog to page 6Gate Valves Gate Valves to DIN/EN in Pressure Seal Design 4) Recommended spare parts
Open the catalog to page 7Gate Valves Gate Valves to DIN/EN in Pressure Seal Design Variants Limit switch(es) Body pressure relief valve . Also refer to type series booklet 7300.1. A body pressure relief valve is necessary if, with the gate valve closed, there is a danger of the liquid trapped inside the valve body heating up and causing an unacceptable pressure increase inside the valve. A warning sign is affixed to the yoke arm near the name plate.
Open the catalog to page 8Gate Valves Gate Valves to DIN/EN in Pressure Seal Design All gate valves with pressure seal bonnet are factory-supplied with a closed connection branch 131.2 with connection dimensions Ø 22 / Ø 14.1 (suitable for pipe Ø 21.3 x 3.6). 131.2 5 Fig. 4: Closed connection branch for body pressure relief valve ④ When connecting to pipe 710, cut here and bevel the face to obtain a welding groove. Connection branch When ordering please state whether a pressure relief valve is to be provided, or whether excess pressure is to be released via a bypass and/or a relief hole in the inlet-side seat ring...
Open the catalog to page 9Gate Valves Gate Valves to DIN/EN in Pressure Seal Design Dimensions and weights Dimensions and weights of AKG-A Nominal size / seat diameter Model with reduced bore on request Open Vertical clearance for removal Contrary to EN 558-1/26
Open the catalog to page 10Gate Valves Gate Valves to DIN/EN in Pressure Seal Design Mating dimensions as per standard Face-to-face lengths: PN 63 and PN 100 to EN 558-1/26 PN 160 see table Flanges: Mating dimensions to EN 1092-1 Flange facing: Type B Other flange designs ■ For example, undrilled with groove (type D) or recess (type F) to EN 1092-1 at both ends ■ Flanges to DIN ■ Other flange designs on request
Open the catalog to page 11Gate Valves Gate Valves to DIN/EN in Pressure Seal Design Dimensions and weights of AKGS-A Fig. 6: AKGS-A Dimensions and weights PN Butt weld ends, unmachined Butt weld ends, machined Pipe dimensions
Open the catalog to page 12Gate Valves Gate Valves to DIN/EN in Pressure Seal Design Mating dimensions as per standard Face-to-face lengths: See table Butt weld ends: See table Weld groove form: DIN EN ISO 9692-1 (1.3 + 1.5) Different designs of butt weld ends and weld groove forms are possible, but only within the dimensions Amax. and Bmin.. Butt weld ends to EN 12627 are possible. Installation instructions The gate valves are designed for a max. differential pressure equal to the permissible operating pressure. If a bypass is necessary or requested for other reasons, a NORI 320 ZXSV globe valve as per type series...
Open the catalog to page 13KSB SE & Co. KGaA Bahnhofplatz 1 • 91257 Pegnitz (Germany) Tel. +49 9241 71-0 www.ksb.com
Open the catalog to page 16All KSB S.A.S. - France catalogs and technical brochures
-
ACTAIR
8 Pages
-
BOA-R
16 Pages
-
Amaline
2 Pages
-
Cervomatic EDP.2
30 Pages
-
ISORIA
2 Pages
-
UGS Type Series Booklet
12 Pages
-
AMTROBOX
12 Pages
-
Ama-Porter
36 Pages
-
AKR/AKRS
12 Pages
-
ACTAIR NG
28 Pages
-
LevelControl Basic 2
36 Pages
-
Pumps ı Automation
76 Pages
-
ACTELEC
22 Pages
-
1/4 turn ACTELEC LEA and LEB
4 Pages
-
Ama-Drainer-Box
12 Pages
-
BOA-Control SAR
8 Pages
-
Amacan S
2 Pages
-
Amacan P
2 Pages
-
Ama-Porter 60 Hz
30 Pages
-
Ama-Porter S
24 Pages
-
Ama-Porter CK-Pumpstation
18 Pages
-
Ama-Drainer-Box Mini
2 Pages
-
Ama-Drainer-Box
2 Pages
-
Ama-Drainer N
2 Pages
-
Ama-Drainer 80, 100
20 Pages
-
Ama-Drainer 4../5..
36 Pages
-
Amamix
2 Pages
-
Amaprop
2 Pages
-
Pumps and Automation
68 Pages
-
The Range of Valves
69 Pages
-
Hya-Rain
2 Pages
-
HGC – Boiler feed pump
2 Pages
-
CHTR
8 Pages
-
Amaline – Submersible Pump
2 Pages
-
Sewatec/Sewabloc
2 Pages
-
Vitalobe ®
2 Pages
-
SISTO
2 Pages
-
GZ
2 Pages
-
CHTC
2 Pages
-
NQ
2 Pages
-
Amacan K
2 Pages
-
AmaDS³
2 Pages
-
product description Movitec
2 Pages
-
SET 100
2 Pages
-
Product publication LUVA
8 Pages
-
Product introduction LUS
2 Pages
-
product description_Multitec
2 Pages
-
Tubular Casing Pumps by KSB.
16 Pages
-
HGM – For good reason
4 Pages
-
The Range of Valves 2010
58 Pages
-
Pumps and Automation 2010
54 Pages
Archived catalogs
-
Ama-Porter
36 Pages