LOGO!MAT T-Series - Simple, Affordable, Flexible LOGO!MAT T-Series

LOGO!MAT T-Series - Simple, Affordable, Flexible 2 Modules – 1 Complete System Take the guesswork out of project planning with the LOGO!MAT T-Series. Using just 2 modules – a straight track and track rotate – you can design a complete conveyor system to fit your needs. Rotate Modules used in place of corners, junctions, diverters and intersections can turn your part up to 360°. These are positioned between varying lengths of straight track, making it easy to develop even the most complex assembly layout. Thanks to our standardized designs, components are available with short lead times, and installations...

Example of a variable layout with Flexible Extension Possibilities Simplified planning - complete layout using only 2 modules Rotate Module as corner Rotate Module as corner Affordability – highly standardized components Short lead times – prefabricated modules in stock Initial Layout Rotate Module as corner Quick assembly and installation – delivered as pre-assembled modules Rotate Module as corner Rotate Module as corner Rotate Module as corner Reusable – sustainably conserves resources Rotate Module as corner Rotate Module as corner Future Layout Rotate Module as intersection Rotate Module...

LOGO!MAT T-Series - Simple, Affordable, Flexible The LOGO!MAT T-Series is a consistent, standardized, and easyto-plan assembly conveyor system. Designed like a model kit, the T-Series uses just two modules, straight tracks and rotates, to link any number or variety of work stations. Using stub rollers throughout the system gives easy access to your part from nearly any angle. If necessary, the stub rollers on both sides of the track can be driven to help ensure accurate and reliable pallet transfer behavior, even in oily or extreme conditions. Active components such as Stops, Locates, or Lift...

Track Module The track modules are conveyor sections with stub rollers on both sides. The standard configuration features driven stub rollers on one side of the track, but in oily conditions or cases where more force is required for reliable pallet transfer, it is possible to drive the stub rollers on both sides simultaneously. The driven rollers include a friction clutch to ensure that they stop spinning beneath a stationary pallet to prevent damage to its underside. Thanks to the stub rollers, the center of the conveyor is open, and components such as Stop Units, Locate Units, etc. can be freely...

LOGO!MAT T-Series - Simple, Affordable, Flexible Stop Unit Cushioned or Non-Cushioned options, positioning accuracy ± 0.5 mm Locate Unit Used with Stop Unit for increased positioning accuracy in X and Y directions, ± 0.2mm Manual Docking Cart Manual cart for removing pallets and reintroducing them to the line Lift Gate Manual operated, pivoting track section for access to the inside of a closed loop Lift & Locate Unit Indexes into and lifts pallet with precise positioning accuracy in X, Y and Z direction, ± 0.1 mm Lift & Rotate Unit Lifts an rotates pallets 90° or 180° Elevator Lifts or lowers...

LOGO!MAT T-Series - Contact Our Planning Tool is specially tailored to LOGO!MAT transfer systems and includes drawing blocks of all of our standard components. The tool enables customers to quickly design and develop a layout of their assembly line using a standard CAD program. The line can be built as planned because the requirements for the LOGO!MAT System are factored into the drawing blocks. Our excellent customer service starts in the project planning phase and carries through to installation and beyond. Using years of experience, we can help you find the most efficient and cost-effective...