High Pressure Foam Analyzer Increase the yield with our solution for foam analysis under oil reservoir conditions The High Pressure Foam Analyzer – HPFA is the worldꞌs only measuring instrument for simultaneously analyzing the amount and structure of liquid foams under high pressure. The instrument provides various options for investigating foam behavior under the real process conditions of foam-assisted flooding methods in EOR as well as hydraulic fracturing. Measuring methods and options ■ Foam-assisted gas flooding ■ Foam as fracking and stimulation liquid ■ easurement of foamability and foam stability based on the M foam height and volume with respect to time ■ Analysis of foam structure and its variation with respect to time based on the number, size, and statistical size distribution of the foam bubbles ■ Measurements at pressures up to 350 bar and temperatures up to 120 °C ■ Foaming with a diverse range of gases such as air, N2, or CO2 ■ Option of adding liquids during

Simultaneous foam height and structure analysis During and after foaming-up by means of gas flow, two high-resolution cameras operating in parallel record the foam height and images of the foam lamellae. Supported by the real-time image evaluation of our ADVANCE software, the HPFA determines the foamability and the foam decay. Within one and the same measurement, it also captures the change in bubble count per area and the absolute bubble size as well as its statistical distribution. Camera recording foam structure Mini Dosing System for adding liquids during measurements Simulation of oil reservoir...